Create meter comparison sets to validate utility bills against interval meter readings in EnerG
Meter comparisons align utility bill data with interval meter readings so you can validate billed usage in EnerG. Use this workflow when you suspect billing errors or when interval hardware may be out of calibration.Results appear on the Building Energy dashboardComparison report when a set is configured. Resolve low on utility meters before you trust a comparison. See Fix completeness gaps.
When to use comparisons
You run comparisons to check whether a provider is over- or under-billing relative to interval data.You also use them to decide whether an interval meter needs calibration or replacement when deviation stays high across periods.
Prerequisites
You need both utility bill data and interval meter data for the same service category at the building.
Requirement
Where to confirm
Utility bills ingested
Completeness on Building meters or Data Quality on meter detail
Select the interval point type that matches how you measure consumption, such as Differential Electric Energy Accumulator or Total Energy.
Open meter comparisons from Building meters
1
Select a building
From Portfolio Home, open a building in the building view.
2
Open Meters
Click Meters in the left sidebar. Review Completeness in the table before you compare. Meters at 0% need Data completeness fixes first.
Building Meters list with Completeness column and Compare Meters button
3
Click Compare Meters
Click Compare Meters in the top-right corner. EnerG opens Meter Comparison Sets for the building.
Meter Comparison Sets list
The list shows every comparison configuration you created for the site.
Meter Comparison Sets page with search and actions
Column
What it shows
Name
Label for the comparison set
Service Type
Category such as Energy
Threshold
Allowed percent deviation before the comparison flags a gap, such as 5% or 2%
Base Meters
Count of utility or billing meters in the set
Compare Meters
Count of interval or sub-meter feeds to validate
Actions
Edit or delete the set
Use Search to filter by name. Click + Create Comparison to add a new set.
Create a meter comparison set
1
Start Create Comparison
On Meter Comparison Sets, click + Create Comparison. The Create Meter Comparison Set panel opens.
Create Meter Comparison Set panel
2
Set service category and name
Choose Service Category tags for every commodity in the analysis, such as Electric, Natural Gas, Lighting, and Steam. Enter a Name that describes the pair, such as Utility Meter to Shadow Meter.
3
Set threshold
Enter Threshold as the percent deviation limit. Charts and alerts highlight periods when billed use diverges from interval data beyond this value.
Start with a strict threshold, such as 2%, then relax only after you trust both data streams.
4
Select utility meters
Under Utility Meters, check each billing meter to use as the base. Site meters such as 8365020 03 typically carry utility bill data.
5
Select interval meters and points
Under Interval Meters, check each interval feed and choose the point type dropdown for that meter. Match the point to the quantity you compare against bills.
Click Save. The new set appears in the list and feeds the building Comparison report when configured.
Thresholds and visualization
The Threshold marks when deviation is too large for your operational standard.Charts highlight periods that breach the threshold so you focus field checks and vendor questions on those ranges.
A threshold that is too loose hides real drift. A threshold that is too tight creates noise when minor timing differences exist between bill periods and interval reads.
{"docsConfig":{"theme":"aspen","$schema":"https://mintlify.com/docs.json","name":"KODE Labs - Product Documentation","colors":{"primary":"#015BFA","light":"#3A9AFF","dark":"#015BFA"},"logo":{"light":"https://mintcdn.com/kodelabs/YfYud6Al4TM68wc2/logo/logo-light.png?fit=max\u0026auto=format\u0026n=YfYud6Al4TM68wc2\u0026q=85\u0026s=00d4ffd6ad7a592e52856804d1a53d12","dark":"https://mintcdn.com/kodelabs/YfYud6Al4TM68wc2/logo/logo-dark.png?fit=max\u0026auto=format\u0026n=YfYud6Al4TM68wc2\u0026q=85\u0026s=a6769f53904d96f5a53ea0c4b3c972d6","href":"/"},"favicon":{"light":"https://mintcdn.com/kodelabs/H3HEEQdnaG21O57-/logo/favicon-light.png?fit=max\u0026auto=format\u0026n=H3HEEQdnaG21O57-\u0026q=85\u0026s=3ae881e353dfb5c2f667e175ec82c799","dark":"https://mintcdn.com/kodelabs/H3HEEQdnaG21O57-/logo/favicon-dark.png?fit=max\u0026auto=format\u0026n=H3HEEQdnaG21O57-\u0026q=85\u0026s=845431bc7d53ce5bf50f56ef53d9137f"},"api":{"params":{"expanded":"closed"},"playground":{"display":"interactive","proxy":true},"examples":{"defaults":"required","languages":["bash","javascript","python","powershell"],"prefill":true,"autogenerate":true},"url":"full"},"appearance":{"default":"light","strict":true},"background":{"color":{"light":"#ffffff","dark":"#121212"}},"navbar":{"links":[{"href":"https://kodelabs.com/contact/","label":"Contact Us"}]},"footer":{"socials":{"x":"https://twitter.com/kodelabs","instagram":"https://www.instagram.com/kode_labs","linkedin":"https://www.linkedin.com/company/kodelabs","youtube":"https://www.youtube.com/channel/UCKCnsgnYtugWxMPzu3UEHkw"},"links":[{"header":"Platform","items":[{"label":"KODE OS","href":"https://kodelabs.com"},{"label":"Integrations","href":"https://kodelabs.com/partners/integrations-library"},{"label":"Security","href":"https://kodelabs.com/security"}]},{"header":"Resources","items":[{"label":"Blog","href":"https://kodelabs.com/blog"},{"label":"Reports \u0026 Guides","href":"https://kodelabs.com/resources"},{"label":"Podcasts \u0026 Webinars","href":"https://kodelabs.com/resources"},{"label":"Case Studies","href":"https://kodelabs.com/case-studies"},{"label":"News","href":"https://kodelabs.com/news"}]},{"header":"Solutions","items":[{"label":"Commercial","href":"https://kodelabs.com/solutions/commercial-real-estate"},{"label":"Corporate","href":"https://kodelabs.com/solutions/corporate"},{"label":"Retail","href":"https://kodelabs.com/solutions/retail"},{"label":"Healthcare","href":"https://kodelabs.com/solutions/healthcare"},{"label":"Education","href":"https://kodelabs.com/solutions/education"}]},{"header":"Company","items":[{"label":"About","href":"https://kodelabs.com/about"},{"label":"Careers","href":"https://kodelabs.com/careers"},{"label":"Internships","href":"https://kodelabs.com/internships"},{"label":"Contact Us","href":"https://kodelabs.com/contact"}]}]},"search":{"prompt":"Search our docs..."},"fonts":{"heading":{"family":"Manrope","weight":600},"body":{"family":"Inter"}},"icons":{"library":"lucide"},"styling":{"eyebrows":"section","codeblocks":{"theme":{"light":"github-light","dark":"github-dark"}},"latex":false},"integrations":{"ga4":{"measurementId":"G-WKYQEE1T4B"}},"banner":{"content":"KODE 3.20 is live. See [what's new in November 2026](/whats-new/2026/v3.20-november-2026).","dismissible":true,"color":{"light":"#015BFA","dark":"#015BFA"}},"errors":{"404":{"redirect":false,"title":"We're working on it!","description":"If you're not seeing this page, we're definitely updating it."}},"contextual":{"options":["copy","view",{"title":"Email KODE support","description":"Contact KODE Labs support for help","icon":"mail","href":"mailto:support@kodelabs.com"}],"display":"toc"},"interaction":{"drilldown":false},"metadata":{"timestamp":true},"navigation":{"global":{"anchors":[{"anchor":"Home","icon":"house","href":"/"},{"anchor":"What's New","icon":"megaphone","href":"/whats-new/2026/v3.20-november-2026"}]},"pages":[]}},"deployment":{"deploymentMetadataValue":{"subdomain":"kodelabs","hasAudioNarration":false,"actualSubdomain":"kodelabs","customDomains":["docs.kodelabs.com"],"gitSource":{"type":"github","owner":"kode-labs","repo":"docs","deployBranch":"main","contentDirectory":"","isPrivate":true,"mountPath":"","label":""},"feedback":{"thumbs":true,"agentFeedback":true},"entitlements":{"AI_CHAT":{"status":"ENABLED"},"REMOVE_BRANDING":{"status":"ENABLED"},"CONTEXTUAL_FEEDBACK":{"status":"ENABLED"},"CODE_SNIPPET_FEEDBACK":{"status":"ENABLED"},"WEB_MCP":{"status":"ENABLED"},"NARRATION":{"status":"ENABLED"}},"buildId":"6af8e4f300819710da52c87a","clientVersion":"0.0.4227","searchFilterCounts":[{"language":"default","tag":"Integrations","count":214},{"language":"default","tag":"All Integrations","count":205},{"language":"default","tag":"KODE API","count":143},{"language":"default","tag":"API reference","count":132},{"language":"default","tag":"EnerG","count":61},{"language":"default","tag":"Meters","count":37},{"language":"default","tag":"Building BI","count":35},{"language":"default","tag":"AssetOps","count":32},{"language":"default","tag":"Cloud BMS","count":31},{"language":"default","tag":"Reference","count":29}],"searchSettings":{"showContentSnippets":true,"isFiltersEnabled":true,"maxResults":10}},"assistantConfig":{"enableStarterQuestions":true,"enableContextualStarterQuestions":true},"basePath":"","hasChatPermissions":true,"hasWebMcpPermissions":true,"toggles":[{"name":"kill-isr","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-rbac-roles","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-mintlify-slack","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-integrations-settings","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"rbac-expansion","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-pr-grouping","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-prefix","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"analytics-v7","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"user-flows-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"no-publish-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-onboarding","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving-live","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"stripTemperatureMiddleware","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"support-platform-pylon-zendesk","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"instant-rollback","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications-server","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-fable","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fixed-ai-action-pricing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automation-resolve-merge-conflict","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"scoped-publishing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"mintql","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"page-level-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-version-history-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"billing-page-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"full-page-search","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workspace-projects","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"assistant-v5","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fork-pr-previews","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"revalidation-jwt","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-sso-scim","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"hobby-abuse-scan","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"dashboard-inbox","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-signup","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-dual-write","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-enabled","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"approve-review-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-metadata","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"sso-setup-deadline-banner","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-serve","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"live-agents","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"starter-pricing","enabled":true,"variant":{"name":"control","enabled":true,"payload":{"type":"string","value":"control"},"feature_enabled":true},"impressionData":false},{"name":"llms-txt-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"wildcard-email-auth","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false}],"googleFontsInlined":true},"customCss":[{"filePath":"custom.css","href":"/_mintlify/custom/kodelabs/fd6257d3326e3afa/custom.css"}]}
{"page":{"pagePath":"products/energ/data-quality/meter-comparisons","slug":"/products/energ/data-quality/meter-comparisons","pageMetadata":{"title":"Meter comparisons","sidebarTitle":"Meter comparisons","description":"Create meter comparison sets to validate utility bills against interval meter readings in EnerG","icon":"git-compare","keywords":["EnerG","meter comparisons","utility vs interval","data validation","threshold","KODE OS"],"href":"/products/energ/data-quality/meter-comparisons"},"description":{"compiledSource":"\"use strict\";\nconst {jsx: _jsx} = arguments[0];\nconst {useMDXComponents: _provideComponents} = arguments[0];\nfunction _createMdxContent(props) {\n const _components = {\n p: \"p\",\n ..._provideComponents(),\n ...props.components\n };\n return _jsx(_components.p, {\n children: \"Create meter comparison sets to validate utility bills against interval meter readings in EnerG\"\n });\n}\nfunction MDXContent(props = {}) {\n const {wrapper: MDXLayout} = {\n ..._provideComponents(),\n ...props.components\n };\n return MDXLayout ? _jsx(MDXLayout, {\n ...props,\n children: _jsx(_createMdxContent, {\n ...props\n })\n }) : _createMdxContent(props);\n}\nreturn {\n default: MDXContent\n};\n","frontmatter":{},"scope":{}},"pageType":"default","mdx":{"mdxSource":{"compiledSource":"\"use strict\";const{Fragment:_Fragment,jsx:_jsx,jsxs:_jsxs}=arguments[0];const{useMDXComponents:_provideComponents}=arguments[0];function _createMdxContent(props){const _components={a:`a`,p:`p`,strong:`strong`,tbody:`tbody`,td:`td`,th:`th`,thead:`thead`,tr:`tr`,..._provideComponents(),...props.components},{Card,CardGroup,Check,Frame,Heading,Info,OptimizedImage,Step,Steps,Table,Tip,Tooltip,Warning}=_components;if(!Card)_missingMdxReference(`Card`,true);if(!CardGroup)_missingMdxReference(`CardGroup`,true);if(!Check)_missingMdxReference(`Check`,true);if(!Frame)_missingMdxReference(`Frame`,true);if(!Heading)_missingMdxReference(`Heading`,true);if(!Info)_missingMdxReference(`Info`,true);if(!OptimizedImage)_missingMdxReference(`OptimizedImage`,true);if(!Step)_missingMdxReference(`Step`,true);if(!Steps)_missingMdxReference(`Steps`,true);if(!Table)_missingMdxReference(`Table`,true);if(!Tip)_missingMdxReference(`Tip`,true);if(!Tooltip)_missingMdxReference(`Tooltip`,true);if(!Warning)_missingMdxReference(`Warning`,true);return _jsxs(_Fragment,{children:[_jsx(_components.p,{children:`Meter comparisons align utility bill data with interval meter readings so you can validate billed usage in EnerG. Use this workflow when you suspect billing errors or when interval hardware may be out of calibration.`}),`\n`,_jsxs(_components.p,{children:[`Results appear on the `,_jsx(_components.a,{href:`/products/energ/analytics/building-dashboards-energy`,children:`Building Energy dashboard`}),` `,_jsx(_components.strong,{children:`Comparison`}),` report when a set is configured. Resolve low `,_jsx(Tooltip,{tip:`A score from 0% to 100% that measures billed coverage from each meter's service start through today.`,children:`data completeness`}),` on utility meters before you trust a comparison. See `,_jsx(_components.a,{href:`/products/energ/data-quality/data-completeness#investigate-and-fix-gaps`,children:`Fix completeness gaps`}),`.`]}),`\n`,_jsx(Heading,{level:`2`,id:`when-to-use-comparisons`,children:`When to use comparisons`}),`\n`,_jsx(_components.p,{children:`You run comparisons to check whether a provider is over- or under-billing relative to interval data.`}),`\n`,_jsx(_components.p,{children:`You also use them to decide whether an interval meter needs calibration or replacement when deviation stays high across periods.`}),`\n`,_jsx(Heading,{level:`2`,id:`prerequisites`,children:`Prerequisites`}),`\n`,_jsxs(_components.p,{children:[`You need `,_jsx(_components.strong,{children:`both`}),` utility bill data and interval meter data for the `,_jsx(_components.strong,{children:`same`}),` service category at the building.`]}),`\n`,_jsxs(Table,{children:[_jsx(_components.thead,{children:_jsxs(_components.tr,{children:[_jsx(_components.th,{children:`Requirement`}),_jsx(_components.th,{children:`Where to confirm`})]})}),_jsxs(_components.tbody,{children:[_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Utility bills ingested`}),_jsxs(_components.td,{children:[_jsx(_components.strong,{children:`Completeness`}),` on `,_jsx(_components.a,{href:`/products/energ/buildings/meters`,children:`Building meters`}),` or `,_jsx(_components.strong,{children:`Data Quality`}),` on meter detail`]})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Interval points active`}),_jsxs(_components.td,{children:[_jsx(_components.strong,{children:`Interval Data`}),` tab on the interval meter; `,_jsx(_components.a,{href:`/products/energ/data-sources/kode-os-data-source`,children:`KODE OS data source`})]})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Meters assigned to the building`}),_jsxs(_components.td,{children:[_jsx(_components.a,{href:`/products/energ/buildings/data-sources`,children:`Building data sources`}),` and `,_jsx(_components.strong,{children:`Assign Meters`}),` workflows`]})]})]})]}),`\n`,_jsx(Info,{children:_jsxs(_components.p,{children:[`Select the interval `,_jsx(_components.strong,{children:`point type`}),` that matches how you measure consumption, such as `,_jsx(_components.strong,{children:`Differential Electric Energy Accumulator`}),` or `,_jsx(_components.strong,{children:`Total Energy`}),`.`]})}),`\n`,_jsx(Heading,{level:`2`,id:`open-meter-comparisons`,children:`Open meter comparisons from Building meters`}),`\n`,_jsxs(Steps,{children:[_jsx(Step,{title:`Select a building`,children:_jsxs(_components.p,{children:[`From `,_jsx(_components.a,{href:`/products/energ/analytics/benchmarking`,children:`Portfolio Home`}),`, open a building in the building view.`]})}),_jsxs(Step,{title:`Open Meters`,children:[_jsxs(_components.p,{children:[`Click `,_jsx(_components.strong,{children:`Meters`}),` in the left sidebar. Review `,_jsx(_components.strong,{children:`Completeness`}),` in the table before you compare. Meters at `,_jsx(_components.strong,{children:`0%`}),` need `,_jsx(_components.a,{href:`/products/energ/data-quality/data-completeness#investigate-and-fix-gaps`,children:`Data completeness`}),` fixes first.`]}),_jsx(Frame,{caption:`Building Meters list with Completeness column and Compare Meters button`,children:_jsx(OptimizedImage,{src:`https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-meters-list.png?fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=965a284fb2b39eab210d7ed7c72c3cda`,alt:`KODE 1420 Office Meters page with Search Meters Select Data Sources Filter Compare Meters and Unassign Meters buttons and table showing Meter Level Service Type Completeness percentages Data Source Utility Hub Kode OS and provider names`,\"data-og-width\":`1024`,width:`1024`,\"data-og-height\":`443`,height:`443`,\"data-path\":`images/energ/energ-meter-comparisons-meters-list.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-meters-list.png?w=280\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=8c32215f88c3fcfb845f9e13cf3d2892 280w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-meters-list.png?w=560\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=a4d5967f563becd95c3c912b09bc77c9 560w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-meters-list.png?w=840\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=605b48f226f6f69f4eeb560e038b1657 840w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-meters-list.png?w=1100\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=7ef79f35663802a4e8093b20cc579a9d 1100w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-meters-list.png?w=1650\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=7497dd5a2570951126b4fbd1891c1e6b 1650w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-meters-list.png?w=2500\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=556f91917414dd5521d11319e186b84d 2500w`})})]}),_jsx(Step,{title:`Click Compare Meters`,children:_jsxs(_components.p,{children:[`Click `,_jsx(_components.strong,{children:`Compare Meters`}),` in the top-right corner. EnerG opens `,_jsx(_components.strong,{children:`Meter Comparison Sets`}),` for the building.`]})})]}),`\n`,_jsx(Heading,{level:`2`,id:`meter-comparison-sets-list`,children:`Meter Comparison Sets list`}),`\n`,_jsx(_components.p,{children:`The list shows every comparison configuration you created for the site.`}),`\n`,_jsx(Frame,{caption:`Meter Comparison Sets page with search and actions`,children:_jsx(OptimizedImage,{src:`https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-sets-list.png?fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=d8bdbebe95cd876d1cd83e8b52aebbc2`,alt:`Meter Comparison Sets page for KODE 1420 Office with Search field Create Comparison button and table with Name Service Type Threshold Base Meters Compare Meters and edit delete actions for Utility Meter to Shadow Meter and Comparison rows`,\"data-og-width\":`1024`,width:`1024`,\"data-og-height\":`265`,height:`265`,\"data-path\":`images/energ/energ-meter-comparisons-sets-list.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-sets-list.png?w=280\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=89372018f4fb8c951c780cf9e5afdd64 280w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-sets-list.png?w=560\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=8b9d5fe291d10c9b37deb7c82f9deb79 560w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-sets-list.png?w=840\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=91961be0c2229344ee9a50ba8239cb07 840w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-sets-list.png?w=1100\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=a63a13b316611d13fd22a6b87ce3f673 1100w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-sets-list.png?w=1650\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=cde32f710801bda7c19ab2ab7379f2c5 1650w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-sets-list.png?w=2500\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=49eb2ad028c5d696a6749f3a9383f391 2500w`})}),`\n`,_jsxs(Table,{children:[_jsx(_components.thead,{children:_jsxs(_components.tr,{children:[_jsx(_components.th,{children:`Column`}),_jsx(_components.th,{children:`What it shows`})]})}),_jsxs(_components.tbody,{children:[_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Name`})}),_jsx(_components.td,{children:`Label for the comparison set`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Service Type`})}),_jsxs(_components.td,{children:[`Category such as `,_jsx(_components.strong,{children:`Energy`})]})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Threshold`})}),_jsxs(_components.td,{children:[`Allowed percent deviation before the comparison flags a gap, such as `,_jsx(_components.strong,{children:`5%`}),` or `,_jsx(_components.strong,{children:`2%`})]})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Base Meters`})}),_jsx(_components.td,{children:`Count of utility or billing meters in the set`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Compare Meters`})}),_jsx(_components.td,{children:`Count of interval or sub-meter feeds to validate`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Actions`})}),_jsx(_components.td,{children:`Edit or delete the set`})]})]})]}),`\n`,_jsxs(_components.p,{children:[`Use `,_jsx(_components.strong,{children:`Search`}),` to filter by name. Click `,_jsx(_components.strong,{children:`+ Create Comparison`}),` to add a new set.`]}),`\n`,_jsx(Heading,{level:`2`,id:`create-a-meter-comparison-set`,children:`Create a meter comparison set`}),`\n`,_jsxs(Steps,{children:[_jsxs(Step,{title:`Start Create Comparison`,children:[_jsxs(_components.p,{children:[`On `,_jsx(_components.strong,{children:`Meter Comparison Sets`}),`, click `,_jsx(_components.strong,{children:`+ Create Comparison`}),`. The `,_jsx(_components.strong,{children:`Create Meter Comparison Set`}),` panel opens.`]}),_jsx(Frame,{caption:`Create Meter Comparison Set panel`,children:_jsx(OptimizedImage,{src:`https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-create-set.png?fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=8b4d699a3537b5f7b6c2613da6a5a819`,alt:`Create Meter Comparison Set modal with subtitle validation analysis to compare utility bills against sub-meter data Service Category Electric Natural Gas Lighting Steam Name Meter Comparison Threshold 2 Utility Meters checklist with 8365020 03 selected and Interval Meters with point type dropdowns`,\"data-og-width\":`1013`,width:`1013`,\"data-og-height\":`875`,height:`875`,\"data-path\":`images/energ/energ-meter-comparisons-create-set.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-create-set.png?w=280\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=d3d70a27bb8fdc6714205302d7785252 280w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-create-set.png?w=560\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=e3503bc82453209312475025aefab70e 560w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-create-set.png?w=840\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=c6642864f406b561d4d2234831e76e35 840w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-create-set.png?w=1100\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=397b4e2d8f3dab0f22387ce413cebe12 1100w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-create-set.png?w=1650\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=609ea6c1822a131ab35babb9f0d09908 1650w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-meter-comparisons-create-set.png?w=2500\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=93b255cb0ccd7369cf53f7c06a77cd87 2500w`})})]}),_jsx(Step,{title:`Set service category and name`,children:_jsxs(_components.p,{children:[`Choose `,_jsx(_components.strong,{children:`Service Category`}),` tags for every commodity in the analysis, such as `,_jsx(_components.strong,{children:`Electric`}),`, `,_jsx(_components.strong,{children:`Natural Gas`}),`, `,_jsx(_components.strong,{children:`Lighting`}),`, and `,_jsx(_components.strong,{children:`Steam`}),`. Enter a `,_jsx(_components.strong,{children:`Name`}),` that describes the pair, such as `,_jsx(_components.strong,{children:`Utility Meter to Shadow Meter`}),`.`]})}),_jsxs(Step,{title:`Set threshold`,children:[_jsxs(_components.p,{children:[`Enter `,_jsx(_components.strong,{children:`Threshold`}),` as the percent deviation limit. Charts and alerts highlight periods when billed use diverges from interval data beyond this value.`]}),_jsx(Tip,{children:_jsxs(_components.p,{children:[`Start with a strict threshold, such as `,_jsx(_components.strong,{children:`2%`}),`, then relax only after you trust both data streams.`]})})]}),_jsx(Step,{title:`Select utility meters`,children:_jsxs(_components.p,{children:[`Under `,_jsx(_components.strong,{children:`Utility Meters`}),`, check each billing meter to use as the base. Site meters such as `,_jsx(_components.strong,{children:`8365020 03`}),` typically carry utility bill data.`]})}),_jsxs(Step,{title:`Select interval meters and points`,children:[_jsxs(_components.p,{children:[`Under `,_jsx(_components.strong,{children:`Interval Meters`}),`, check each interval feed and choose the `,_jsx(_components.strong,{children:`point type`}),` dropdown for that meter. Match the point to the quantity you compare against bills.`]}),_jsx(Check,{children:_jsxs(_components.p,{children:[`Click `,_jsx(_components.strong,{children:`Save`}),`. The new set appears in the list and feeds the building `,_jsx(_components.strong,{children:`Comparison`}),` report when configured.`]})})]})]}),`\n`,_jsx(Heading,{level:`2`,id:`thresholds-and-visualization`,children:`Thresholds and visualization`}),`\n`,_jsxs(_components.p,{children:[`The `,_jsx(_components.strong,{children:`Threshold`}),` marks when deviation is too large for your operational standard.`]}),`\n`,_jsx(_components.p,{children:`Charts highlight periods that breach the threshold so you focus field checks and vendor questions on those ranges.`}),`\n`,_jsx(Warning,{children:_jsx(_components.p,{children:`A threshold that is too loose hides real drift. A threshold that is too tight creates noise when minor timing differences exist between bill periods and interval reads.`})}),`\n`,_jsxs(_components.p,{children:[`When deviation persists, open `,_jsx(_components.a,{href:`/products/energ/data-quality/alert-center`,children:`Alert center`}),` for billing issues or `,_jsx(_components.a,{href:`/products/energ/buildings/meters#add-new-billing-data`,children:`Add new billing data`}),` when the utility stream is incomplete.`]}),`\n`,_jsx(Heading,{level:`2`,id:`next-steps`,children:`Next steps`}),`\n`,_jsxs(CardGroup,{cols:2,children:[_jsx(Card,{title:`Building meters`,icon:`gauge`,href:`/products/energ/buildings/meters#compare-meters`,arrow:true,cta:`Open`,children:_jsxs(_components.p,{children:[`Return to the meters list and `,_jsx(_components.strong,{children:`Compare Meters`}),`.`]})}),_jsx(Card,{title:`Data completeness`,icon:`percent`,href:`/products/energ/data-quality/data-completeness`,arrow:true,cta:`Open`,children:_jsx(_components.p,{children:`Fix billing gaps before you compare streams.`})}),_jsx(Card,{title:`Data quality overview`,icon:`book-open`,href:`/products/energ/data-quality/data-quality-overview`,arrow:true,cta:`Read`,children:_jsx(_components.p,{children:`Hub for completeness, comparisons, and alerts.`})}),_jsx(Card,{title:`Building Energy — Comparison`,icon:`zap`,href:`/products/energ/analytics/building-dashboards-energy`,arrow:true,cta:`Open`,children:_jsx(_components.p,{children:`Review comparison charts on the Energy dashboard.`})})]})]})}function MDXContent(props={}){const{wrapper:MDXLayout}={..._provideComponents(),...props.components};return MDXLayout?_jsx(MDXLayout,{...props,children:_jsx(_createMdxContent,{...props})}):_createMdxContent(props)}return{default:MDXContent};function _missingMdxReference(id,component){throw new Error(`Expected `+(component?`component`:`object`)+\" `\"+id+\"` to be defined: you likely forgot to import, pass, or provide it.\")}","frontmatter":{},"scope":{"codeStyling":{"theme":{"light":"github-light","dark":"github-dark"}},"config":{},"pageMetadata":{"title":"Meter comparisons","sidebarTitle":"Meter comparisons","description":"Create meter comparison sets to validate utility bills against interval meter readings in EnerG","icon":"git-compare","keywords":["EnerG","meter comparisons","utility vs interval","data validation","threshold","KODE OS"],"href":"/products/energ/data-quality/meter-comparisons"}}},"mdxSourceWithNoJs":null},"mdxExtracts":{"tableOfContents":[{"title":"When to use comparisons","slug":"when-to-use-comparisons","depth":2,"children":[]},{"title":"Prerequisites","slug":"prerequisites","depth":2,"children":[]},{"title":"Open meter comparisons from Building meters","slug":"open-meter-comparisons","depth":2,"children":[]},{"title":"Meter Comparison Sets list","slug":"meter-comparison-sets-list","depth":2,"children":[]},{"title":"Create a meter comparison set","slug":"create-a-meter-comparison-set","depth":2,"children":[]},{"title":"Thresholds and visualization","slug":"thresholds-and-visualization","depth":2,"children":[]},{"title":"Next steps","slug":"next-steps","depth":2,"children":[]}],"codeExamples":{}},"jsLinks":["/_mintlify/custom/kodelabs/ce5d3bd08e955b7b/navbar-assistant.js"],"subdomain":"kodelabs","siteName":"KODE Labs - Product Documentation","title":"Meter comparisons - KODE Labs - Product Documentation","contextualStarterQuestions":[{"_id":"6a88bb841af966f81de13cc6","deploymentId":"67fd4d9635f314f3a994be65","questionText":"What data do I need first?","status":"active","generatedBy":"contextual","path":"products/energ/data-quality/meter-comparisons","createdAt":"2026-08-21T20:56:36.946Z","updatedAt":"2026-08-21T20:56:36.946Z","__v":0},{"_id":"6a88bb841af966f81de13cc5","deploymentId":"67fd4d9635f314f3a994be65","questionText":"How do I set up a comparison set?","status":"active","generatedBy":"contextual","path":"products/energ/data-quality/meter-comparisons","createdAt":"2026-08-21T20:56:36.946Z","updatedAt":"2026-08-21T20:56:36.946Z","__v":0},{"_id":"6a88bb841af966f81de13cc4","deploymentId":"67fd4d9635f314f3a994be65","questionText":"When should I run meter comparisons?","status":"active","generatedBy":"contextual","path":"products/energ/data-quality/meter-comparisons","createdAt":"2026-08-21T20:56:36.946Z","updatedAt":"2026-08-21T20:56:36.946Z","__v":0}],"navMaps":{"firstHrefInVersion":{},"firstHrefInLanguage":{}},"lastModified":"2026-08-19T11:09:39.629Z","gitLastModified":"2026-08-19T11:07:50.000Z","originalFileLocation":"products/energ/data-quality/meter-comparisons.mdx"},"headHtml":"\u003cscript data-mint-head>(function(){var d=document.documentElement,p=\"light\";if(!p){try{p=localStorage.getItem(\"isDarkMode\")}catch(e){}if(p==='true')p='dark';else if(p==='false')p='light';if(p!=='light'\u0026\u0026p!=='dark'\u0026\u0026p!=='system')p=\"light\"}var r=p==='system'?(matchMedia(\"(prefers-color-scheme: dark)\").matches?'dark':'light'):p;d.classList.remove(r==='dark'?'light':'dark');d.classList.add(r);d.setAttribute(\"data-theme-preference\",p)})();\u003c/script>\u003cmeta data-mint-head name=\"description\" content=\"Create meter comparison sets to validate utility bills against interval meter readings in EnerG\">\u003cmeta data-mint-head name=\"application-name\" content=\"KODE Labs - Product Documentation\">\u003cmeta data-mint-head name=\"generator\" content=\"Mintlify\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/android-chrome-192x192.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"apple-touch-icon\" type=\"image/png\" sizes=\"180x180\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/apple-touch-icon.png\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/favicon-16x16.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/favicon-32x32.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/favicon.ico\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon-dark/android-chrome-192x192.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon-dark/favicon-16x16.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon-dark/favicon-32x32.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon-dark/favicon.ico\" media=\"(prefers-color-scheme: dark)\">\u003cmeta data-mint-head property=\"og:title\" content=\"Meter comparisons - KODE Labs - Product Documentation\">\u003cmeta data-mint-head property=\"og:description\" content=\"Create meter comparison sets to validate utility bills against interval meter readings in EnerG\">\u003cmeta data-mint-head property=\"og:site_name\" content=\"KODE Labs - Product Documentation\">\u003cmeta data-mint-head property=\"og:url\" content=\"https://docs.kodelabs.com/products/energ/data-quality/meter-comparisons\">\u003cmeta data-mint-head property=\"og:type\" content=\"website\">\u003cmeta data-mint-head property=\"og:image\" content=\"https://kodelabs.mintlify.site/_mintlify/api/og/v2?division=Data+Quality\u0026amp;title=Meter+comparisons\u0026amp;description=Create+meter+comparison+sets+to+validate+utility+bills+against+interval+meter+readings+in+EnerG\u0026amp;theme=ac252318c016362b89abdbd3\u0026amp;signature=7b1e3207da888e7f02f9bf249a8e9b5ecbfd18f54fb0facf75304ead2887fe98\">\u003cmeta data-mint-head property=\"og:image:width\" content=\"1200\">\u003cmeta data-mint-head property=\"og:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"twitter:card\" content=\"summary_large_image\">\u003cmeta data-mint-head name=\"twitter:title\" content=\"Meter comparisons - KODE Labs - Product Documentation\">\u003cmeta data-mint-head name=\"twitter:description\" content=\"Create meter comparison sets to validate utility bills against interval meter readings in EnerG\">\u003cmeta data-mint-head name=\"twitter:image\" content=\"https://kodelabs.mintlify.site/_mintlify/api/og/v2?division=Data+Quality\u0026amp;title=Meter+comparisons\u0026amp;description=Create+meter+comparison+sets+to+validate+utility+bills+against+interval+meter+readings+in+EnerG\u0026amp;theme=ac252318c016362b89abdbd3\u0026amp;signature=7b1e3207da888e7f02f9bf249a8e9b5ecbfd18f54fb0facf75304ead2887fe98\">\u003cmeta data-mint-head name=\"twitter:image:width\" content=\"1200\">\u003cmeta data-mint-head name=\"twitter:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"msapplication-config\" content=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/browserconfig.xml\">\u003cmeta data-mint-head name=\"apple-mobile-web-app-title\" content=\"KODE Labs - Product Documentation\">\u003cmeta data-mint-head name=\"msapplication-TileColor\" content=\"#015BFA\">\u003clink data-mint-head rel=\"canonical\" href=\"https://docs.kodelabs.com/products/energ/data-quality/meter-comparisons\">\u003clink data-mint-head rel=\"alternate\" type=\"application/xml\" href=\"/sitemap.xml\">\u003clink data-mint-head rel=\"alternate\" type=\"text/markdown\" href=\"/products/energ/data-quality/meter-comparisons.md\">\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@graph\":[{\"@type\":\"Organization\",\"@id\":\"https://docs.kodelabs.com/#organization\",\"name\":\"KODE Labs - Product Documentation\",\"url\":\"https://docs.kodelabs.com\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https://mintcdn.com/kodelabs/YfYud6Al4TM68wc2/logo/logo-light.png?fit=max\u0026auto=format\u0026n=YfYud6Al4TM68wc2\u0026q=85\u0026s=00d4ffd6ad7a592e52856804d1a53d12\"}},{\"@type\":\"WebSite\",\"@id\":\"https://docs.kodelabs.com#website\",\"name\":\"KODE Labs - Product Documentation\",\"url\":\"https://docs.kodelabs.com\",\"publisher\":{\"@id\":\"https://docs.kodelabs.com/#organization\"}},{\"@type\":\"WebPage\",\"@id\":\"https://docs.kodelabs.com/products/energ/data-quality/meter-comparisons#webpage\",\"url\":\"https://docs.kodelabs.com/products/energ/data-quality/meter-comparisons\",\"name\":\"Meter comparisons\",\"description\":\"Create meter comparison sets to validate utility bills against interval meter readings in EnerG\",\"dateModified\":\"2026-08-19T11:07:50.000Z\",\"isPartOf\":{\"@id\":\"https://docs.kodelabs.com#website\"},\"breadcrumb\":{\"@id\":\"https://docs.kodelabs.com/products/energ/data-quality/meter-comparisons#breadcrumb\"}},{\"@type\":\"BreadcrumbList\",\"@id\":\"https://docs.kodelabs.com/products/energ/data-quality/meter-comparisons#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Building view\",\"item\":\"https://docs.kodelabs.com/products/energ/analytics/site-dashboards\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Data Quality\",\"item\":\"https://docs.kodelabs.com/products/energ/data-quality/data-quality-overview\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Meter comparisons\",\"item\":\"https://docs.kodelabs.com/products/energ/data-quality/meter-comparisons\"}]},{\"@type\":[\"Article\",\"TechArticle\"],\"@id\":\"https://docs.kodelabs.com/products/energ/data-quality/meter-comparisons#article\",\"headline\":\"Meter comparisons\",\"name\":\"Meter comparisons\",\"description\":\"Create meter comparison sets to validate utility bills against interval meter readings in EnerG\",\"url\":\"https://docs.kodelabs.com/products/energ/data-quality/meter-comparisons\",\"mainEntityOfPage\":{\"@id\":\"https://docs.kodelabs.com/products/energ/data-quality/meter-comparisons#webpage\"},\"dateModified\":\"2026-08-19T11:07:50.000Z\",\"keywords\":\"EnerG, meter comparisons, utility vs interval, data validation, threshold, KODE OS\",\"publisher\":{\"@id\":\"https://docs.kodelabs.com/#organization\"},\"isPartOf\":{\"@id\":\"https://docs.kodelabs.com#website\"}}]}\u003c/script>","agentPointerHref":"/products/energ/data-quality/meter-comparisons.md","siteName":"KODE Labs - Product Documentation","nav":{"global":{"anchors":[{"anchor":"Home","icon":"house","href":"/"},{"anchor":"What's New","icon":"megaphone","href":"/whats-new/2026/v3.20-november-2026"}]},"products":[{"product":"Cloud BMS","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/cloud-bms.svg","description":"Cloud building management, graphics, and control","pages":[{"title":"Cloud BMS","href":"/products/kode-os/get-started/introduction"}]},{"product":"Building BI","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/bbi.svg","description":"Dashboards and analytics for building performance","pages":[{"title":"Building BI","href":"/products/building-bi/overview"}]},{"product":"FDD","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/fdd.svg","description":"Fault detection and diagnostics for equipment","pages":[{"title":"FDD","href":"/products/fdd/overview"}]},{"product":"FTT","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/ftt.svg","description":"Automated functional testing and commissioning","pages":[{"title":"FTT","href":"/products/ftt/overview"}]},{"product":"AssetOps","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/assetops.svg","description":"Asset and maintenance operations","pages":[{"title":"AssetOps","href":"/products/assetops/quickstart/overview"}]},{"product":"EnerG","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/enerG.svg","description":"Energy management and sustainability reporting","groups":[{"group":"Get Started","pages":[{"title":"What is EnerG?","sidebarTitle":"Introduction","icon":"rocket","href":"/products/energ/get-started/introduction"},{"title":"Key concepts","sidebarTitle":"Key concepts","icon":"lightbulb","href":"/products/energ/get-started/key-concepts"},{"title":"Portfolio and building navigation","sidebarTitle":"Navigation","icon":"map","href":"/products/energ/get-started/navigation"}]},{"group":"Concepts","icon":"lightbulb","pages":[{"title":"Data sources and meters","sidebarTitle":"Data and meters","icon":"gauge","href":"/products/energ/concepts/data-and-meters"},{"title":"Data completeness","sidebarTitle":"Data completeness","icon":"percent","href":"/products/energ/concepts/data-completeness"},{"title":"Interval data normalization","sidebarTitle":"Interval normalization","icon":"filter","href":"/products/energ/concepts/interval-data-normalization"},{"title":"Benchmarking and intensity metrics","sidebarTitle":"Benchmarking","icon":"chart-column","href":"/products/energ/concepts/benchmarking-and-intensity"},{"title":"Baselines and weather normalization","sidebarTitle":"Baselines and weather","icon":"chart-line","href":"/products/energ/concepts/baselines-and-weather-normalization"},{"title":"Energy modeling and M\u0026V","sidebarTitle":"Energy modeling","icon":"activity","href":"/products/energ/concepts/energy-modeling"},{"title":"Budgets and capital planning","sidebarTitle":"Budgets and capital","icon":"dollar-sign","href":"/products/energ/concepts/budgets-and-capital-planning"},{"title":"Emissions accounting","sidebarTitle":"Emissions accounting","icon":"cloud","href":"/products/energ/concepts/emissions-accounting"}]},{"group":"Portfolio view","pages":[{"title":"Portfolio Home","sidebarTitle":"Home","icon":"house","href":"/products/energ/analytics/benchmarking"},{"group":"Dashboards","icon":"layout-dashboard","expanded":false,"pages":[{"title":"Portfolio Energy dashboard","sidebarTitle":"Energy","icon":"zap","href":"/products/energ/analytics/portfolio-dashboards-energy"},{"title":"Portfolio Water dashboard","sidebarTitle":"Water","icon":"droplets","href":"/products/energ/analytics/portfolio-dashboards-water"},{"title":"Portfolio Waste dashboard","sidebarTitle":"Waste","icon":"trash-2","href":"/products/energ/analytics/portfolio-dashboards-waste"}]},{"group":"Data Sources","icon":"database","expanded":false,"pages":[{"title":"Portfolio data sources","sidebarTitle":"Overview","icon":"database","href":"/products/energ/analytics/portfolio-data-sources"},{"title":"Arcadia","sidebarTitle":"Arcadia","icon":"plug","href":"/products/energ/data-sources/arcadia"},{"title":"ENERGY STAR Portfolio Manager","sidebarTitle":"ENERGY STAR","icon":"refresh-cw","href":"/products/energ/data-sources/portfolio-manager"},{"title":"CSV uploads","sidebarTitle":"CSV uploads","icon":"file-spreadsheet","href":"/products/energ/data-sources/csv-uploads"},{"title":"Manual entry","sidebarTitle":"Manual entry","icon":"pencil","href":"/products/energ/data-sources/manual-entry"},{"title":"KODE OS data source","sidebarTitle":"KODE OS","icon":"plug","href":"/products/energ/data-sources/kode-os-data-source"}]},{"title":"Portfolio meters","sidebarTitle":"Meters","icon":"gauge","href":"/products/energ/analytics/portfolio-meters"},{"group":"Baseline analysis","icon":"chart-line","expanded":false,"pages":[{"title":"Baseline analysis overview","sidebarTitle":"Overview","icon":"layout-grid","href":"/products/energ/analytics/baseline-portfolio-overview"},{"title":"Baseline analysis configurations","sidebarTitle":"Configurations","icon":"settings-2","href":"/products/energ/analytics/baseline-portfolio-configurations"}]},{"title":"Portfolio targets","sidebarTitle":"Target","icon":"target","href":"/products/energ/analytics/portfolio-targets"},{"title":"Portfolio budget and planning","sidebarTitle":"Budget","icon":"dollar-sign","href":"/products/energ/analytics/portfolio-budgets"},{"title":"Portfolio capital planning","sidebarTitle":"Capital planning","icon":"layers","href":"/products/energ/analytics/portfolio-capital-planning"},{"group":"Emissions","icon":"cloud","expanded":false,"pages":[{"title":"Portfolio emissions overview","sidebarTitle":"Overview","icon":"cloud","href":"/products/energ/analytics/portfolio-emissions-overview"},{"title":"Portfolio emissions benchmarking","sidebarTitle":"Benchmarking","icon":"chart-column","href":"/products/energ/analytics/portfolio-emissions-benchmarking"},{"title":"Emission factors library","sidebarTitle":"Emission factors","icon":"book-open","href":"/products/energ/analytics/portfolio-emissions-emission-factors"},{"title":"Volume contracts","sidebarTitle":"Contracts","icon":"file-text","href":"/products/energ/analytics/portfolio-emissions-contracts"},{"title":"Fleet emissions","sidebarTitle":"Fleet emissions","icon":"truck","href":"/products/energ/analytics/portfolio-emissions-fleet-emissions"},{"title":"Fugitive emissions","sidebarTitle":"Fugitive emissions","icon":"wind","href":"/products/energ/analytics/portfolio-emissions-fugitive-emissions"}]},{"title":"Portfolio certifications","sidebarTitle":"Certifications","icon":"award","href":"/products/energ/analytics/portfolio-certifications"},{"title":"Alert center","sidebarTitle":"Alert center","icon":"cog","href":"/products/energ/data-quality/alert-center"},{"title":"Report Builder","sidebarTitle":"Report Builder","icon":"file-spreadsheet","href":"/products/energ/finance/reporting"}]},{"group":"Building view","pages":[{"group":"Dashboards","icon":"layout-dashboard","expanded":false,"pages":[{"title":"Building dashboards overview","sidebarTitle":"Dashboards Overview","icon":"layout-dashboard","href":"/products/energ/analytics/site-dashboards"},{"title":"Building Energy dashboard","sidebarTitle":"Energy","icon":"zap","href":"/products/energ/analytics/building-dashboards-energy"},{"title":"Building Water dashboard","sidebarTitle":"Water","icon":"droplets","href":"/products/energ/analytics/building-dashboards-water"},{"title":"Building Waste dashboard","sidebarTitle":"Waste","icon":"trash-2","href":"/products/energ/analytics/building-dashboards-waste"}]},{"title":"Building information","sidebarTitle":"Building information","icon":"cog","href":"/products/energ/buildings/building-information"},{"title":"Building meters","sidebarTitle":"Meters","icon":"gauge","href":"/products/energ/buildings/meters"},{"group":"Energy Modeling","icon":"activity","expanded":false,"pages":[{"title":"Create an M\u0026V model","sidebarTitle":"M\u0026V","icon":"circle-fading-plus","href":"/products/energ/energy-modeling/mv-models"},{"title":"M\u0026V analysis","sidebarTitle":"M\u0026V analysis","icon":"cog","href":"/products/energ/energy-modeling/mv-analysis"},{"title":"Forecasting","sidebarTitle":"Forecast","icon":"chart-line","href":"/products/energ/energy-modeling/forecasting"}]},{"group":"Data Sources","icon":"database","expanded":false,"pages":[{"title":"Building data sources","sidebarTitle":"Overview","icon":"database","href":"/products/energ/buildings/data-sources"},{"title":"Arcadia","sidebarTitle":"Arcadia","icon":"plug","href":"/products/energ/data-sources/arcadia"},{"title":"CSV uploads","sidebarTitle":"CSV uploads","icon":"file-spreadsheet","href":"/products/energ/data-sources/csv-uploads"},{"title":"Manual entry","sidebarTitle":"Manual entry","icon":"pencil","href":"/products/energ/data-sources/manual-entry"},{"title":"KODE OS data source","sidebarTitle":"KODE OS","icon":"plug","href":"/products/energ/data-sources/kode-os-data-source"}]},{"group":"Budget","icon":"dollar-sign","expanded":false,"pages":[{"title":"Building budget overview","sidebarTitle":"Overview","icon":"dollar-sign","href":"/products/energ/finance/budget-overview"},{"title":"Budget model configuration","sidebarTitle":"Model configuration","icon":"settings-2","href":"/products/energ/finance/budgets"},{"title":"Budget planning","sidebarTitle":"Planning","icon":"clipboard-list","href":"/products/energ/finance/budget-planning"},{"title":"Utility cost analysis","sidebarTitle":"Cost analysis","icon":"cog","href":"/products/energ/finance/cost-analysis"}]},{"title":"Capital planning","sidebarTitle":"Capital planning","icon":"landmark","href":"/products/energ/sustainability/capital-planning"},{"title":"Building emissions overview","sidebarTitle":"Emissions","icon":"cloud","href":"/products/energ/buildings/emissions-overview"},{"title":"Building certifications","sidebarTitle":"Certifications","icon":"award","href":"/products/energ/sustainability/certifications"},{"group":"Data Quality","icon":"shield-check","expanded":false,"pages":[{"title":"Data quality","sidebarTitle":"Overview","icon":"book-open","href":"/products/energ/data-quality/data-quality-overview"},{"title":"Data completeness","sidebarTitle":"Data completeness","description":"Review meter timelines and upload missing bills to close data completeness gaps in EnerG","icon":"percent","href":"/products/energ/data-quality/data-completeness"},{"title":"Meter comparisons","sidebarTitle":"Meter comparisons","icon":"git-compare","href":"/products/energ/data-quality/meter-comparisons"}]}]},{"group":"Reference","icon":"book-a","pages":[{"title":"Data and meter fields","sidebarTitle":"Data and meter fields","description":"Reference for EnerG service types, units, meter columns, data table columns, and data quality values","icon":"table","href":"/products/energ/reference/data-and-meter-fields"},{"title":"Calculations and parameters","sidebarTitle":"Calculations","icon":"calculator","href":"/products/energ/reference/calculations-and-parameters"},{"title":"Emissions reference","sidebarTitle":"Emissions reference","icon":"table","href":"/products/energ/reference/emissions-reference"},{"title":"Interval normalization labels","sidebarTitle":"Normalization labels","icon":"table","href":"/products/energ/reference/interval-normalization-labels"},{"title":"Reporting and alerts reference","sidebarTitle":"Reporting and alerts","icon":"table","href":"/products/energ/reference/reporting-and-alerts"},{"title":"KODE glossary","sidebarTitle":"Glossary","icon":"book-a","href":"/products/energ/glossary"}]}]},{"product":"Launchpad","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/launchpad.svg","description":"Dynamic management for apps, users, and buildings","pages":[{"title":"Launchpad","href":"/products/launchpad/get-started/introduction"}]},{"product":"Mobile app","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/mobile-app.svg","description":"Monitor and operate buildings from iOS and Android","pages":[{"title":"Mobile app","href":"/products/mobile-app/overview"}]},{"product":"KODE API","icon":"braces","description":"Build services and integrations with KODE OS","pages":[{"title":"KODE API","href":"/products/kode-api"}]},{"product":"Integrations","icon":"cable","description":"Connect 200+ building systems to KODE OS","pages":[{"title":"Integrations","href":"/products/integrations/get-started/introduction"}]},{"product":"What's New","icon":"megaphone","description":"KODE platform release notes and updates","pages":[{"title":"What's New","href":"/whats-new/2026/v3.20-november-2026"}]}]},"basePath":"","title":"Meter comparisons - KODE Labs - Product Documentation","deploymentId":"dpl_vSEmv961Ncyvz1psVwgUnTXQMSYk","buildId":"dpl_vSEmv961Ncyvz1psVwgUnTXQMSYk","dynamics":["10e4515597","07c022d89b","a74be98ba7"],"chunks":["BannerMarkdown-DnSAhvaM.js","dist-DIfYWxfm.js","lib-DMeTj1gb.js","lib-B8HbPgcC.js","katex-Dbtb6Wk7.js","html-void-elements-mCSPHezU.js","marked.esm-CZWythHk.js","Frame-BRsfsIIG.js","DynamicMarkdown-NFqqduU7.js","zoom-image-lightbox-BguUeq2N.js","lightbox-handle-r17bVUz3.js"]}