Connect KODE OS interval meters to EnerG for interval trends, M&V, and forecasting at the building level
The KODE OS data source connects EnerG to you already map in KODE OS. Add the integration at the portfolio level, then open Kode OS from Building data sources to assign meters to each site.EnerG pulls electric, natural gas, steam, water, and thermal interval points you template in KODE OS. Use this source for Interval Trends, M&V models, and Forecasting.Raw interval readings are irregular. EnerG normalizes them into 15-minute and daily virtual points with quality labels before analytics use them. See Interval data normalization.
Initial sync can take noticeable time while EnerG processes interval payloads after you connect.
Connect the source (portfolio)
1
Open Data Sources
In the portfolio left sidebar, click Data Sources.
Data Sources page at the portfolio level
2
Add KODE OS
Click + Add Data Source. Select KODE_OS in the API dropdown, then confirm.
Add Data Source dialog with KODE_OS selected
The Kode OS source appears in All Data Sources after creation.
Open KODE OS from the building view
1
Select a building
From Portfolio Home, open a building in the building view.
2
Open Kode OS
Expand Data Sources in the left sidebar. Under All Data Sources, click Kode OS.
The Kode OS page shows PRIVATE visibility and a Meters tab. Interval meters synced from KODE OS appear here before they roll up to building dashboards.
Meters tab
The Meters tab lists interval meters assigned to the building.
Kode OS Meters tab with electric and water interval meters
The table shows each meter’s level, service type, unit, and status. For column definitions, see Meter table columns.
Control
Purpose
Search Meters
Filter by meter number or name
Assign Meters
Link additional KODE OS meters from the portfolio library
Meters with both utility billing and interval feeds also appear on Building meters with an interval badge.
Assign meters to the building
Click Assign Meters to link KODE OS meters that exist in the portfolio but are not yet tied to this building.
Add existing Meters dialog for KODE OS
Search the list, select meters, then click Submit. If the table is empty, confirm meters are modeled in KODE OS and synced to EnerG at the portfolio level first.
Unlink meters from the building
Remove interval meters from the building assignment without deleting the underlying KODE OS point.
Unlink Meters from Building dialog
Select meters, then click Unlink. Historical interval data may remain in the portfolio; the building no longer includes those meters in rollups. See Unassign meters for utility-backed meters.
Pair KODE OS interval meters with Arcadia utility meters on the same building when you run Meter comparisons.
Supported meter families
EnerG imports electric, natural gas, steam, water, and thermal interval points from KODE OS. Electric points often cover switchgear, VFDs, chillers, and subpanels, while gas, steam, and water points cover plant and process loads. For how service types group into portfolio totals, see Service types.
Next steps
Building data sources
Return to the building data sources overview.
Interval data normalization
See how interval reads become clean 15-minute values.
Interval Trends
Chart sub-daily usage after interval meters are active.
Building meters
Review interval and utility meters for the building.
Last modified on August 19, 2026
Was this page helpful?
{"docsConfig":{"theme":"aspen","$schema":"https://mintlify.com/docs.json","name":"KODE Labs - Product Documentation","colors":{"primary":"#015BFA","light":"#3A9AFF","dark":"#015BFA"},"logo":{"light":"https://mintcdn.com/kodelabs/YfYud6Al4TM68wc2/logo/logo-light.png?fit=max\u0026auto=format\u0026n=YfYud6Al4TM68wc2\u0026q=85\u0026s=00d4ffd6ad7a592e52856804d1a53d12","dark":"https://mintcdn.com/kodelabs/YfYud6Al4TM68wc2/logo/logo-dark.png?fit=max\u0026auto=format\u0026n=YfYud6Al4TM68wc2\u0026q=85\u0026s=a6769f53904d96f5a53ea0c4b3c972d6","href":"/"},"favicon":{"light":"https://mintcdn.com/kodelabs/H3HEEQdnaG21O57-/logo/favicon-light.png?fit=max\u0026auto=format\u0026n=H3HEEQdnaG21O57-\u0026q=85\u0026s=3ae881e353dfb5c2f667e175ec82c799","dark":"https://mintcdn.com/kodelabs/H3HEEQdnaG21O57-/logo/favicon-dark.png?fit=max\u0026auto=format\u0026n=H3HEEQdnaG21O57-\u0026q=85\u0026s=845431bc7d53ce5bf50f56ef53d9137f"},"api":{"params":{"expanded":"closed"},"playground":{"display":"interactive","proxy":true},"examples":{"defaults":"required","languages":["bash","javascript","python","powershell"],"prefill":true,"autogenerate":true},"url":"full"},"appearance":{"default":"light","strict":true},"background":{"color":{"light":"#ffffff","dark":"#121212"}},"navbar":{"links":[{"href":"https://kodelabs.com/contact/","label":"Contact Us"}]},"footer":{"socials":{"x":"https://twitter.com/kodelabs","instagram":"https://www.instagram.com/kode_labs","linkedin":"https://www.linkedin.com/company/kodelabs","youtube":"https://www.youtube.com/channel/UCKCnsgnYtugWxMPzu3UEHkw"},"links":[{"header":"Platform","items":[{"label":"KODE OS","href":"https://kodelabs.com"},{"label":"Integrations","href":"https://kodelabs.com/partners/integrations-library"},{"label":"Security","href":"https://kodelabs.com/security"}]},{"header":"Resources","items":[{"label":"Blog","href":"https://kodelabs.com/blog"},{"label":"Reports \u0026 Guides","href":"https://kodelabs.com/resources"},{"label":"Podcasts \u0026 Webinars","href":"https://kodelabs.com/resources"},{"label":"Case Studies","href":"https://kodelabs.com/case-studies"},{"label":"News","href":"https://kodelabs.com/news"}]},{"header":"Solutions","items":[{"label":"Commercial","href":"https://kodelabs.com/solutions/commercial-real-estate"},{"label":"Corporate","href":"https://kodelabs.com/solutions/corporate"},{"label":"Retail","href":"https://kodelabs.com/solutions/retail"},{"label":"Healthcare","href":"https://kodelabs.com/solutions/healthcare"},{"label":"Education","href":"https://kodelabs.com/solutions/education"}]},{"header":"Company","items":[{"label":"About","href":"https://kodelabs.com/about"},{"label":"Careers","href":"https://kodelabs.com/careers"},{"label":"Internships","href":"https://kodelabs.com/internships"},{"label":"Contact Us","href":"https://kodelabs.com/contact"}]}]},"search":{"prompt":"Search our docs..."},"fonts":{"heading":{"family":"Manrope","weight":600},"body":{"family":"Inter"}},"icons":{"library":"lucide"},"styling":{"eyebrows":"section","codeblocks":{"theme":{"light":"github-light","dark":"github-dark"}},"latex":false},"integrations":{"ga4":{"measurementId":"G-WKYQEE1T4B"}},"banner":{"content":"KODE 3.20 is live. See [what's new in November 2026](/whats-new/2026/v3.20-november-2026).","dismissible":true,"color":{"light":"#015BFA","dark":"#015BFA"}},"errors":{"404":{"redirect":false,"title":"We're working on it!","description":"If you're not seeing this page, we're definitely updating it."}},"contextual":{"options":["copy","view",{"title":"Email KODE support","description":"Contact KODE Labs support for help","icon":"mail","href":"mailto:support@kodelabs.com"}],"display":"toc"},"interaction":{"drilldown":false},"metadata":{"timestamp":true},"navigation":{"global":{"anchors":[{"anchor":"Home","icon":"house","href":"/"},{"anchor":"What's New","icon":"megaphone","href":"/whats-new/2026/v3.20-november-2026"}]},"pages":[]}},"deployment":{"deploymentMetadataValue":{"subdomain":"kodelabs","hasAudioNarration":false,"actualSubdomain":"kodelabs","customDomains":["docs.kodelabs.com"],"gitSource":{"type":"github","owner":"kode-labs","repo":"docs","deployBranch":"main","contentDirectory":"","isPrivate":true,"mountPath":"","label":""},"feedback":{"thumbs":true,"agentFeedback":true},"entitlements":{"AI_CHAT":{"status":"ENABLED"},"REMOVE_BRANDING":{"status":"ENABLED"},"CONTEXTUAL_FEEDBACK":{"status":"ENABLED"},"CODE_SNIPPET_FEEDBACK":{"status":"ENABLED"},"WEB_MCP":{"status":"ENABLED"},"NARRATION":{"status":"ENABLED"}},"buildId":"6af8e4f300819710da52c87a","clientVersion":"0.0.4227","searchFilterCounts":[{"language":"default","tag":"Integrations","count":214},{"language":"default","tag":"All Integrations","count":205},{"language":"default","tag":"KODE API","count":143},{"language":"default","tag":"API reference","count":132},{"language":"default","tag":"EnerG","count":61},{"language":"default","tag":"Meters","count":37},{"language":"default","tag":"Building BI","count":35},{"language":"default","tag":"AssetOps","count":32},{"language":"default","tag":"Cloud BMS","count":31},{"language":"default","tag":"Reference","count":29}],"searchSettings":{"showContentSnippets":true,"isFiltersEnabled":true,"maxResults":10}},"assistantConfig":{"enableStarterQuestions":true,"enableContextualStarterQuestions":true},"basePath":"","hasChatPermissions":true,"hasWebMcpPermissions":true,"toggles":[{"name":"kill-isr","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-rbac-roles","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-mintlify-slack","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-integrations-settings","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"rbac-expansion","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-pr-grouping","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-prefix","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"analytics-v7","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"user-flows-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"no-publish-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-onboarding","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving-live","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"stripTemperatureMiddleware","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"support-platform-pylon-zendesk","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"instant-rollback","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications-server","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-fable","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fixed-ai-action-pricing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automation-resolve-merge-conflict","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"scoped-publishing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"mintql","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"page-level-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-version-history-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"billing-page-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"full-page-search","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workspace-projects","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"assistant-v5","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fork-pr-previews","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"revalidation-jwt","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-sso-scim","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"hobby-abuse-scan","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"dashboard-inbox","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-signup","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-dual-write","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-enabled","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"approve-review-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-metadata","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"sso-setup-deadline-banner","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-serve","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"live-agents","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"starter-pricing","enabled":true,"variant":{"name":"control","enabled":true,"payload":{"type":"string","value":"control"},"feature_enabled":true},"impressionData":false},{"name":"llms-txt-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"wildcard-email-auth","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false}],"googleFontsInlined":true},"customCss":[{"filePath":"custom.css","href":"/_mintlify/custom/kodelabs/fd6257d3326e3afa/custom.css"}]}
{"page":{"pagePath":"products/energ/data-sources/kode-os-data-source","slug":"/products/energ/data-sources/kode-os-data-source","pageMetadata":{"title":"KODE OS data source","sidebarTitle":"KODE OS","description":"Connect KODE OS interval meters to EnerG for interval trends, M\u0026V, and forecasting at the building level","icon":"plug","keywords":["EnerG","KODE OS","interval meters","data source","building data sources","advanced meters"],"href":"/products/energ/data-sources/kode-os-data-source"},"description":{"compiledSource":"\"use strict\";\nconst {jsx: _jsx} = arguments[0];\nconst {useMDXComponents: _provideComponents} = arguments[0];\nfunction _createMdxContent(props) {\n const _components = {\n p: \"p\",\n ..._provideComponents(),\n ...props.components\n };\n return _jsx(_components.p, {\n children: \"Connect KODE OS interval meters to EnerG for interval trends, M\u0026V, and forecasting at the building level\"\n });\n}\nfunction MDXContent(props = {}) {\n const {wrapper: MDXLayout} = {\n ..._provideComponents(),\n ...props.components\n };\n return MDXLayout ? _jsx(MDXLayout, {\n ...props,\n children: _jsx(_createMdxContent, {\n ...props\n })\n }) : _createMdxContent(props);\n}\nreturn {\n default: MDXContent\n};\n","frontmatter":{},"scope":{}},"pageType":"default","mdx":{"mdxSource":{"compiledSource":"\"use strict\";const{Fragment:_Fragment,jsx:_jsx,jsxs:_jsxs}=arguments[0];const{useMDXComponents:_provideComponents}=arguments[0];function _createMdxContent(props){const _components={a:`a`,p:`p`,strong:`strong`,tbody:`tbody`,td:`td`,th:`th`,thead:`thead`,tr:`tr`,..._provideComponents(),...props.components},{Card,CardGroup,Check,Frame,Heading,Info,Note,OptimizedImage,Step,Steps,Table,Tooltip}=_components;if(!Card)_missingMdxReference(`Card`,true);if(!CardGroup)_missingMdxReference(`CardGroup`,true);if(!Check)_missingMdxReference(`Check`,true);if(!Frame)_missingMdxReference(`Frame`,true);if(!Heading)_missingMdxReference(`Heading`,true);if(!Info)_missingMdxReference(`Info`,true);if(!Note)_missingMdxReference(`Note`,true);if(!OptimizedImage)_missingMdxReference(`OptimizedImage`,true);if(!Step)_missingMdxReference(`Step`,true);if(!Steps)_missingMdxReference(`Steps`,true);if(!Table)_missingMdxReference(`Table`,true);if(!Tooltip)_missingMdxReference(`Tooltip`,true);return _jsxs(_Fragment,{children:[_jsxs(_components.p,{children:[`The `,_jsx(_components.strong,{children:`KODE OS`}),` data source connects EnerG to `,_jsx(Tooltip,{tip:`Interval meters record usage every hour or every 15 minutes for load shapes, forecasting, and M\u0026V.`,children:`interval meters`}),` you already map in KODE OS. Add the integration at the `,_jsx(_components.a,{href:`/products/energ/analytics/portfolio-data-sources`,children:`portfolio level`}),`, then open `,_jsx(_components.strong,{children:`Kode OS`}),` from `,_jsx(_components.a,{href:`/products/energ/buildings/data-sources`,children:`Building data sources`}),` to assign meters to each site.`]}),`\n`,_jsxs(_components.p,{children:[`EnerG pulls electric, natural gas, steam, water, and thermal interval points you template in KODE OS. Use this source for `,_jsx(_components.a,{href:`/products/energ/analytics/building-dashboards-energy#interval-trends`,children:`Interval Trends`}),`, `,_jsx(_components.a,{href:`/products/energ/energy-modeling/mv-models`,children:`M\u0026V models`}),`, and `,_jsx(_components.a,{href:`/products/energ/energy-modeling/forecasting`,children:`Forecasting`}),`.`]}),`\n`,_jsxs(_components.p,{children:[`Raw interval readings are irregular. EnerG normalizes them into 15-minute and daily virtual points with quality labels before analytics use them. See `,_jsx(_components.a,{href:`/products/energ/concepts/interval-data-normalization`,children:`Interval data normalization`}),`.`]}),`\n`,_jsx(Note,{children:_jsx(_components.p,{children:`Initial sync can take noticeable time while EnerG processes interval payloads after you connect.`})}),`\n`,_jsx(Heading,{level:`2`,id:`connect-the-source-portfolio`,children:`Connect the source (portfolio)`}),`\n`,_jsxs(Steps,{children:[_jsxs(Step,{title:`Open Data Sources`,children:[_jsxs(_components.p,{children:[`In the portfolio left sidebar, click `,_jsx(_components.strong,{children:`Data Sources`}),`.`]}),_jsx(Frame,{caption:`Data Sources page at the portfolio level`,children:_jsx(OptimizedImage,{src:`https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-portfolio-nav.png?fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=dfdb1287bcc287c026f223762e124458`,alt:`EnerG Data Sources page with Arcadia Manual Entry Kode OS and CSV Upload source cards and Add Data Source button`,\"data-og-width\":`1262`,width:`1262`,\"data-og-height\":`925`,height:`925`,\"data-path\":`images/energ/energ-data-sources-portfolio-nav.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-portfolio-nav.png?w=280\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=cc0ef6e06c36325fc9816adc1d4e6346 280w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-portfolio-nav.png?w=560\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=cf554969eb9c304058fe2a52b2b05474 560w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-portfolio-nav.png?w=840\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=05d763eb1d172e9d5a71ff8a27ea0369 840w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-portfolio-nav.png?w=1100\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=b5a46c7c77932814f186d6c6d7f81803 1100w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-portfolio-nav.png?w=1650\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=2217405c2b12c946e388402c30e77aa4 1650w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-portfolio-nav.png?w=2500\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=45abc7eda110b7c2f87dacac117bbb47 2500w`})})]}),_jsxs(Step,{title:`Add KODE OS`,children:[_jsxs(_components.p,{children:[`Click `,_jsx(_components.strong,{children:`+ Add Data Source`}),`. Select `,_jsx(_components.strong,{children:`KODE_OS`}),` in the `,_jsx(_components.strong,{children:`API`}),` dropdown, then confirm.`]}),_jsx(Frame,{caption:`Add Data Source dialog with KODE_OS selected`,children:_jsx(OptimizedImage,{src:`https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-add-kode-os.png?fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=c2a2528b552d564d1474739e86a2ac11`,alt:`Add Data Source dialog with KODE_OS selected in API dropdown`,\"data-og-width\":`1254`,width:`1254`,\"data-og-height\":`603`,height:`603`,\"data-path\":`images/energ/energ-data-sources-add-kode-os.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-add-kode-os.png?w=280\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=8e89f6e07698bbc753e024d2f5f9e9d9 280w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-add-kode-os.png?w=560\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=a0d020e11fae9472a3e31fad9b208210 560w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-add-kode-os.png?w=840\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=49f3c246f2ca9b18488f2b7e18013bbd 840w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-add-kode-os.png?w=1100\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=6a7f40919948200634f27e92561cbf29 1100w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-add-kode-os.png?w=1650\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=6b1ca24e95e104a3ac28ec6882811e4d 1650w, https://mintcdn.com/kodelabs/Ph3_DUgZdP7vM-lt/images/energ/energ-data-sources-add-kode-os.png?w=2500\u0026fit=max\u0026auto=format\u0026n=Ph3_DUgZdP7vM-lt\u0026q=85\u0026s=d09ecf20b96f33b9412086d384e0bc83 2500w`})})]})]}),`\n`,_jsx(Check,{children:_jsxs(_components.p,{children:[`The `,_jsx(_components.strong,{children:`Kode OS`}),` source appears in `,_jsx(_components.strong,{children:`All Data Sources`}),` after creation.`]})}),`\n`,_jsx(Heading,{level:`2`,id:`open-kode-os-from-the-building-view`,children:`Open KODE OS from the building view`}),`\n`,_jsxs(Steps,{children:[_jsx(Step,{title:`Select a building`,children:_jsxs(_components.p,{children:[`From `,_jsx(_components.a,{href:`/products/energ/analytics/benchmarking`,children:`Portfolio Home`}),`, open a building in the building view.`]})}),_jsx(Step,{title:`Open Kode OS`,children:_jsxs(_components.p,{children:[`Expand `,_jsx(_components.strong,{children:`Data Sources`}),` in the left sidebar. Under `,_jsx(_components.strong,{children:`All Data Sources`}),`, click `,_jsx(_components.strong,{children:`Kode OS`}),`.`]})})]}),`\n`,_jsxs(_components.p,{children:[`The `,_jsx(_components.strong,{children:`Kode OS`}),` page shows `,_jsx(_components.strong,{children:`PRIVATE`}),` visibility and a `,_jsx(_components.strong,{children:`Meters`}),` tab. Interval meters synced from KODE OS appear here before they roll up to building dashboards.`]}),`\n`,_jsx(Heading,{level:`2`,id:`meters-tab`,children:`Meters tab`}),`\n`,_jsxs(_components.p,{children:[`The `,_jsx(_components.strong,{children:`Meters`}),` tab lists interval meters assigned to the building.`]}),`\n`,_jsx(Frame,{caption:`Kode OS Meters tab with electric and water interval meters`,children:_jsx(OptimizedImage,{src:`https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-meters.png?fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=4d91f2e5a00cd43b2d3dcf4fcba86d81`,alt:`Kode OS data source Meters tab with Search Meters Assign Meters button and table showing VFD_MBH Chiller_kWh SB_51A electric SITE_METER meters and Water_Meter_1 Basin_Cleaning_Flow_Meter water meters with Active status`,\"data-og-width\":`1024`,width:`1024`,\"data-og-height\":`494`,height:`494`,\"data-path\":`images/energ/energ-building-kode-os-meters.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-meters.png?w=280\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=dfbc1eff62dcf925275d7d7674a7508a 280w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-meters.png?w=560\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=402727d8b94bfc93d535bc59f49fda07 560w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-meters.png?w=840\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=c689bb62ca814fdb0792c795b78d7bbe 840w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-meters.png?w=1100\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=632a89923f5e78334426a134eb955266 1100w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-meters.png?w=1650\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=c52547e6c0699cda97b6daf09c8f85a5 1650w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-meters.png?w=2500\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=321b28f3e826d48a067ef7a0c65461ba 2500w`})}),`\n`,_jsxs(_components.p,{children:[`The table shows each meter’s level, service type, unit, and status. For column definitions, see `,_jsx(_components.a,{href:`/products/energ/reference/data-and-meter-fields#meter-columns`,children:`Meter table columns`}),`.`]}),`\n`,_jsxs(Table,{children:[_jsx(_components.thead,{children:_jsxs(_components.tr,{children:[_jsx(_components.th,{children:`Control`}),_jsx(_components.th,{children:`Purpose`})]})}),_jsxs(_components.tbody,{children:[_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Search Meters`})}),_jsx(_components.td,{children:`Filter by meter number or name`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Assign Meters`})}),_jsx(_components.td,{children:`Link additional KODE OS meters from the portfolio library`})]})]})]}),`\n`,_jsxs(_components.p,{children:[`Meters with `,_jsx(_components.strong,{children:`both`}),` utility billing and interval feeds also appear on `,_jsx(_components.a,{href:`/products/energ/buildings/meters`,children:`Building meters`}),` with an interval badge.`]}),`\n`,_jsx(Heading,{level:`2`,id:`assign-meters-to-the-building`,children:`Assign meters to the building`}),`\n`,_jsxs(_components.p,{children:[`Click `,_jsx(_components.strong,{children:`Assign Meters`}),` to link KODE OS meters that exist in the portfolio but are not yet tied to this building.`]}),`\n`,_jsx(Frame,{caption:`Add existing Meters dialog for KODE OS`,children:_jsx(OptimizedImage,{src:`https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-assign-meters.png?fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=0f2c19449a8f146d191a24d57057301c`,alt:`Add existing Meters modal with Search Meters and empty table pagination 0 of 0 with Cancel and Submit`,\"data-og-width\":`900`,width:`900`,\"data-og-height\":`521`,height:`521`,\"data-path\":`images/energ/energ-building-kode-os-assign-meters.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-assign-meters.png?w=280\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=21d8f1a122df5d42b3a30de6d7d32d9e 280w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-assign-meters.png?w=560\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=06e8602836bc4cbd16d9ec86ee4b050b 560w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-assign-meters.png?w=840\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=247d4d97f13a3a396904831acbb5339e 840w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-assign-meters.png?w=1100\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=4243d63885a4fb449def8439c03d5756 1100w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-assign-meters.png?w=1650\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=7269bb01ce332ef564d17878f06d26a0 1650w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-assign-meters.png?w=2500\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=41679ca82c9e1cdfc3160adccbe6ed13 2500w`})}),`\n`,_jsxs(_components.p,{children:[`Search the list, select meters, then click `,_jsx(_components.strong,{children:`Submit`}),`. If the table is empty, confirm meters are modeled in KODE OS and synced to EnerG at the portfolio level first.`]}),`\n`,_jsx(Heading,{level:`2`,id:`unlink-meters-from-the-building`,children:`Unlink meters from the building`}),`\n`,_jsx(_components.p,{children:`Remove interval meters from the building assignment without deleting the underlying KODE OS point.`}),`\n`,_jsx(Frame,{caption:`Unlink Meters from Building dialog`,children:_jsx(OptimizedImage,{src:`https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-unlink-meters.png?fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=fcba75c0d3990db5893f67e2b790eae0`,alt:`Unlink Meters from Building modal with meter table showing meter numbers names providers addresses service types Natural Gas and Electric checkboxes and pagination 1-10 of 12816`,\"data-og-width\":`681`,width:`681`,\"data-og-height\":`584`,height:`584`,\"data-path\":`images/energ/energ-building-kode-os-unlink-meters.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-unlink-meters.png?w=280\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=76f2f876462b0b6915d0eed38c225178 280w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-unlink-meters.png?w=560\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=02c30883b61a94d42080391dd2da5021 560w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-unlink-meters.png?w=840\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=23d224cb141f4ff63f07314fa3926bf3 840w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-unlink-meters.png?w=1100\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=419177ac67862c002a5a03ebdab57617 1100w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-unlink-meters.png?w=1650\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=d8b163b757c502b066172e5aa49b967f 1650w, https://mintcdn.com/kodelabs/0XJAojMwxBOWwfw5/images/energ/energ-building-kode-os-unlink-meters.png?w=2500\u0026fit=max\u0026auto=format\u0026n=0XJAojMwxBOWwfw5\u0026q=85\u0026s=a3df6f7b181694804fff0af947721634 2500w`})}),`\n`,_jsxs(_components.p,{children:[`Select meters, then click `,_jsx(_components.strong,{children:`Unlink`}),`. Historical interval data may remain in the portfolio; the building no longer includes those meters in rollups. See `,_jsx(_components.a,{href:`/products/energ/buildings/meters#unassign-meters-from-the-building`,children:`Unassign meters`}),` for utility-backed meters.`]}),`\n`,_jsx(Heading,{level:`2`,id:`use-interval-data-in-energ`,children:`Use interval data in EnerG`}),`\n`,_jsxs(_components.p,{children:[`After meters are `,_jsx(_components.strong,{children:`Active`}),`, interval reads power:`]}),`\n`,_jsxs(Table,{children:[_jsx(_components.thead,{children:_jsxs(_components.tr,{children:[_jsx(_components.th,{children:`Workflow`}),_jsx(_components.th,{children:`Where to open it`})]})}),_jsxs(_components.tbody,{children:[_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Interval trends`})}),_jsx(_components.td,{children:_jsx(_components.a,{href:`/products/energ/analytics/building-dashboards-energy#interval-trends`,children:`Building Energy dashboard — Interval Trends`})})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Meter detail`})}),_jsxs(_components.td,{children:[_jsx(_components.a,{href:`/products/energ/buildings/meters`,children:`Building meters`}),` `,_jsx(_components.strong,{children:`Interval Data`}),` tab`]})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`M\u0026V and forecast`})}),_jsxs(_components.td,{children:[_jsx(_components.a,{href:`/products/energ/concepts/energy-modeling`,children:`Energy Modeling`}),` when the meter category is `,_jsx(_components.strong,{children:`Interval`})]})]})]})]}),`\n`,_jsx(Info,{children:_jsxs(_components.p,{children:[`Pair KODE OS interval meters with `,_jsx(_components.a,{href:`/products/energ/data-sources/arcadia`,children:`Arcadia`}),` utility meters on the same building when you run `,_jsx(_components.a,{href:`/products/energ/data-quality/meter-comparisons`,children:`Meter comparisons`}),`.`]})}),`\n`,_jsx(Heading,{level:`2`,id:`supported-meter-families`,children:`Supported meter families`}),`\n`,_jsxs(_components.p,{children:[`EnerG imports electric, natural gas, steam, water, and thermal interval points from KODE OS. Electric points often cover switchgear, VFDs, chillers, and subpanels, while gas, steam, and water points cover plant and process loads. For how service types group into portfolio totals, see `,_jsx(_components.a,{href:`/products/energ/reference/data-and-meter-fields#service-types`,children:`Service types`}),`.`]}),`\n`,_jsx(Heading,{level:`2`,id:`next-steps`,children:`Next steps`}),`\n`,_jsxs(CardGroup,{cols:2,children:[_jsx(Card,{title:`Building data sources`,icon:`database`,href:`/products/energ/buildings/data-sources`,arrow:true,cta:`Open`,children:_jsx(_components.p,{children:`Return to the building data sources overview.`})}),_jsx(Card,{title:`Interval data normalization`,icon:`filter`,href:`/products/energ/concepts/interval-data-normalization`,arrow:true,cta:`Read`,children:_jsx(_components.p,{children:`See how interval reads become clean 15-minute values.`})}),_jsx(Card,{title:`Interval Trends`,icon:`activity`,href:`/products/energ/analytics/building-dashboards-energy#interval-trends`,arrow:true,cta:`Open`,children:_jsx(_components.p,{children:`Chart sub-daily usage after interval meters are active.`})}),_jsx(Card,{title:`Building meters`,icon:`gauge`,href:`/products/energ/buildings/meters`,arrow:true,cta:`Open`,children:_jsx(_components.p,{children:`Review interval and utility meters for the building.`})})]})]})}function MDXContent(props={}){const{wrapper:MDXLayout}={..._provideComponents(),...props.components};return MDXLayout?_jsx(MDXLayout,{...props,children:_jsx(_createMdxContent,{...props})}):_createMdxContent(props)}return{default:MDXContent};function _missingMdxReference(id,component){throw new Error(`Expected `+(component?`component`:`object`)+\" `\"+id+\"` to be defined: you likely forgot to import, pass, or provide it.\")}","frontmatter":{},"scope":{"codeStyling":{"theme":{"light":"github-light","dark":"github-dark"}},"config":{},"pageMetadata":{"title":"KODE OS data source","sidebarTitle":"KODE OS","description":"Connect KODE OS interval meters to EnerG for interval trends, M\u0026V, and forecasting at the building level","icon":"plug","keywords":["EnerG","KODE OS","interval meters","data source","building data sources","advanced meters"],"href":"/products/energ/data-sources/kode-os-data-source"}}},"mdxSourceWithNoJs":null},"mdxExtracts":{"tableOfContents":[{"title":"Connect the source (portfolio)","slug":"connect-the-source-portfolio","depth":2,"children":[]},{"title":"Open KODE OS from the building view","slug":"open-kode-os-from-the-building-view","depth":2,"children":[]},{"title":"Meters tab","slug":"meters-tab","depth":2,"children":[]},{"title":"Assign meters to the building","slug":"assign-meters-to-the-building","depth":2,"children":[]},{"title":"Unlink meters from the building","slug":"unlink-meters-from-the-building","depth":2,"children":[]},{"title":"Use interval data in EnerG","slug":"use-interval-data-in-energ","depth":2,"children":[]},{"title":"Supported meter families","slug":"supported-meter-families","depth":2,"children":[]},{"title":"Next steps","slug":"next-steps","depth":2,"children":[]}],"codeExamples":{}},"jsLinks":["/_mintlify/custom/kodelabs/ce5d3bd08e955b7b/navbar-assistant.js"],"subdomain":"kodelabs","siteName":"KODE Labs - Product Documentation","title":"KODE OS data source - KODE Labs - Product Documentation","contextualStarterQuestions":[{"_id":"6a88bb851af966f81de13cce","deploymentId":"67fd4d9635f314f3a994be65","questionText":"How is interval data normalized?","status":"active","generatedBy":"contextual","path":"products/energ/data-sources/kode-os-data-source","createdAt":"2026-08-21T20:56:37.416Z","updatedAt":"2026-08-21T20:56:37.416Z","__v":0},{"_id":"6a88bb851af966f81de13ccc","deploymentId":"67fd4d9635f314f3a994be65","questionText":"How do I connect KODE OS?","status":"active","generatedBy":"contextual","path":"products/energ/data-sources/kode-os-data-source","createdAt":"2026-08-21T20:56:37.416Z","updatedAt":"2026-08-21T20:56:37.416Z","__v":0},{"_id":"6a88bb851af966f81de13ccd","deploymentId":"67fd4d9635f314f3a994be65","questionText":"What data types does this support?","status":"active","generatedBy":"contextual","path":"products/energ/data-sources/kode-os-data-source","createdAt":"2026-08-21T20:56:37.416Z","updatedAt":"2026-08-21T20:56:37.416Z","__v":0}],"navMaps":{"firstHrefInVersion":{},"firstHrefInLanguage":{}},"lastModified":"2026-08-19T11:09:39.618Z","gitLastModified":"2026-08-19T11:07:50.000Z","originalFileLocation":"products/energ/data-sources/kode-os-data-source.mdx"},"headHtml":"\u003cscript data-mint-head>(function(){var d=document.documentElement,p=\"light\";if(!p){try{p=localStorage.getItem(\"isDarkMode\")}catch(e){}if(p==='true')p='dark';else if(p==='false')p='light';if(p!=='light'\u0026\u0026p!=='dark'\u0026\u0026p!=='system')p=\"light\"}var r=p==='system'?(matchMedia(\"(prefers-color-scheme: dark)\").matches?'dark':'light'):p;d.classList.remove(r==='dark'?'light':'dark');d.classList.add(r);d.setAttribute(\"data-theme-preference\",p)})();\u003c/script>\u003cmeta data-mint-head name=\"description\" content=\"Connect KODE OS interval meters to EnerG for interval trends, M\u0026amp;V, and forecasting at the building level\">\u003cmeta data-mint-head name=\"application-name\" content=\"KODE Labs - Product Documentation\">\u003cmeta data-mint-head name=\"generator\" content=\"Mintlify\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/android-chrome-192x192.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"apple-touch-icon\" type=\"image/png\" sizes=\"180x180\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/apple-touch-icon.png\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/favicon-16x16.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/favicon-32x32.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/favicon.ico\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon-dark/android-chrome-192x192.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon-dark/favicon-16x16.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon-dark/favicon-32x32.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon-dark/favicon.ico\" media=\"(prefers-color-scheme: dark)\">\u003cmeta data-mint-head property=\"og:title\" content=\"KODE OS data source - KODE Labs - Product Documentation\">\u003cmeta data-mint-head property=\"og:description\" content=\"Connect KODE OS interval meters to EnerG for interval trends, M\u0026amp;V, and forecasting at the building level\">\u003cmeta data-mint-head property=\"og:site_name\" content=\"KODE Labs - Product Documentation\">\u003cmeta data-mint-head property=\"og:url\" content=\"https://docs.kodelabs.com/products/energ/data-sources/kode-os-data-source\">\u003cmeta data-mint-head property=\"og:type\" content=\"website\">\u003cmeta data-mint-head property=\"og:image\" content=\"https://kodelabs.mintlify.site/_mintlify/api/og/v2?division=Data+Sources\u0026amp;title=KODE+OS+data+source\u0026amp;description=Connect+KODE+OS+interval+meters+to+EnerG+for+interval+trends%2C+M%26V%2C+and+forecasting+at+the+building+level\u0026amp;theme=ac252318c016362b89abdbd3\u0026amp;signature=c00d38ddd810d8f16788d6eb2996e1da417359437383132c01af16c6c94de6e9\">\u003cmeta data-mint-head property=\"og:image:width\" content=\"1200\">\u003cmeta data-mint-head property=\"og:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"twitter:card\" content=\"summary_large_image\">\u003cmeta data-mint-head name=\"twitter:title\" content=\"KODE OS data source - KODE Labs - Product Documentation\">\u003cmeta data-mint-head name=\"twitter:description\" content=\"Connect KODE OS interval meters to EnerG for interval trends, M\u0026amp;V, and forecasting at the building level\">\u003cmeta data-mint-head name=\"twitter:image\" content=\"https://kodelabs.mintlify.site/_mintlify/api/og/v2?division=Data+Sources\u0026amp;title=KODE+OS+data+source\u0026amp;description=Connect+KODE+OS+interval+meters+to+EnerG+for+interval+trends%2C+M%26V%2C+and+forecasting+at+the+building+level\u0026amp;theme=ac252318c016362b89abdbd3\u0026amp;signature=c00d38ddd810d8f16788d6eb2996e1da417359437383132c01af16c6c94de6e9\">\u003cmeta data-mint-head name=\"twitter:image:width\" content=\"1200\">\u003cmeta data-mint-head name=\"twitter:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"msapplication-config\" content=\"/mintlify-assets/_mintlify/favicons/kodelabs/vtcGE1gj2AkAE1l2/_generated/favicon/browserconfig.xml\">\u003cmeta data-mint-head name=\"apple-mobile-web-app-title\" content=\"KODE Labs - Product Documentation\">\u003cmeta data-mint-head name=\"msapplication-TileColor\" content=\"#015BFA\">\u003clink data-mint-head rel=\"canonical\" href=\"https://docs.kodelabs.com/products/energ/data-sources/kode-os-data-source\">\u003clink data-mint-head rel=\"alternate\" type=\"application/xml\" href=\"/sitemap.xml\">\u003clink data-mint-head rel=\"alternate\" type=\"text/markdown\" href=\"/products/energ/data-sources/kode-os-data-source.md\">\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@graph\":[{\"@type\":\"Organization\",\"@id\":\"https://docs.kodelabs.com/#organization\",\"name\":\"KODE Labs - Product Documentation\",\"url\":\"https://docs.kodelabs.com\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https://mintcdn.com/kodelabs/YfYud6Al4TM68wc2/logo/logo-light.png?fit=max\u0026auto=format\u0026n=YfYud6Al4TM68wc2\u0026q=85\u0026s=00d4ffd6ad7a592e52856804d1a53d12\"}},{\"@type\":\"WebSite\",\"@id\":\"https://docs.kodelabs.com#website\",\"name\":\"KODE Labs - Product Documentation\",\"url\":\"https://docs.kodelabs.com\",\"publisher\":{\"@id\":\"https://docs.kodelabs.com/#organization\"}},{\"@type\":\"WebPage\",\"@id\":\"https://docs.kodelabs.com/products/energ/data-sources/kode-os-data-source#webpage\",\"url\":\"https://docs.kodelabs.com/products/energ/data-sources/kode-os-data-source\",\"name\":\"KODE OS data source\",\"description\":\"Connect KODE OS interval meters to EnerG for interval trends, M\u0026V, and forecasting at the building level\",\"dateModified\":\"2026-08-19T11:07:50.000Z\",\"isPartOf\":{\"@id\":\"https://docs.kodelabs.com#website\"},\"breadcrumb\":{\"@id\":\"https://docs.kodelabs.com/products/energ/data-sources/kode-os-data-source#breadcrumb\"}},{\"@type\":\"BreadcrumbList\",\"@id\":\"https://docs.kodelabs.com/products/energ/data-sources/kode-os-data-source#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Portfolio view\",\"item\":\"https://docs.kodelabs.com/products/energ/analytics/benchmarking\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Data Sources\",\"item\":\"https://docs.kodelabs.com/products/energ/analytics/portfolio-data-sources\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"KODE OS data source\",\"item\":\"https://docs.kodelabs.com/products/energ/data-sources/kode-os-data-source\"}]},{\"@type\":[\"Article\",\"TechArticle\"],\"@id\":\"https://docs.kodelabs.com/products/energ/data-sources/kode-os-data-source#article\",\"headline\":\"KODE OS data source\",\"name\":\"KODE OS data source\",\"description\":\"Connect KODE OS interval meters to EnerG for interval trends, M\u0026V, and forecasting at the building level\",\"url\":\"https://docs.kodelabs.com/products/energ/data-sources/kode-os-data-source\",\"mainEntityOfPage\":{\"@id\":\"https://docs.kodelabs.com/products/energ/data-sources/kode-os-data-source#webpage\"},\"dateModified\":\"2026-08-19T11:07:50.000Z\",\"keywords\":\"EnerG, KODE OS, interval meters, data source, building data sources, advanced meters\",\"publisher\":{\"@id\":\"https://docs.kodelabs.com/#organization\"},\"isPartOf\":{\"@id\":\"https://docs.kodelabs.com#website\"}}]}\u003c/script>","agentPointerHref":"/products/energ/data-sources/kode-os-data-source.md","siteName":"KODE Labs - Product Documentation","nav":{"global":{"anchors":[{"anchor":"Home","icon":"house","href":"/"},{"anchor":"What's New","icon":"megaphone","href":"/whats-new/2026/v3.20-november-2026"}]},"products":[{"product":"Cloud BMS","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/cloud-bms.svg","description":"Cloud building management, graphics, and control","pages":[{"title":"Cloud BMS","href":"/products/kode-os/get-started/introduction"}]},{"product":"Building BI","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/bbi.svg","description":"Dashboards and analytics for building performance","pages":[{"title":"Building BI","href":"/products/building-bi/overview"}]},{"product":"FDD","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/fdd.svg","description":"Fault detection and diagnostics for equipment","pages":[{"title":"FDD","href":"/products/fdd/overview"}]},{"product":"FTT","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/ftt.svg","description":"Automated functional testing and commissioning","pages":[{"title":"FTT","href":"/products/ftt/overview"}]},{"product":"AssetOps","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/assetops.svg","description":"Asset and maintenance operations","pages":[{"title":"AssetOps","href":"/products/assetops/quickstart/overview"}]},{"product":"EnerG","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/enerG.svg","description":"Energy management and sustainability reporting","groups":[{"group":"Get Started","pages":[{"title":"What is EnerG?","sidebarTitle":"Introduction","icon":"rocket","href":"/products/energ/get-started/introduction"},{"title":"Key concepts","sidebarTitle":"Key concepts","icon":"lightbulb","href":"/products/energ/get-started/key-concepts"},{"title":"Portfolio and building navigation","sidebarTitle":"Navigation","icon":"map","href":"/products/energ/get-started/navigation"}]},{"group":"Concepts","icon":"lightbulb","pages":[{"title":"Data sources and meters","sidebarTitle":"Data and meters","icon":"gauge","href":"/products/energ/concepts/data-and-meters"},{"title":"Data completeness","sidebarTitle":"Data completeness","icon":"percent","href":"/products/energ/concepts/data-completeness"},{"title":"Interval data normalization","sidebarTitle":"Interval normalization","icon":"filter","href":"/products/energ/concepts/interval-data-normalization"},{"title":"Benchmarking and intensity metrics","sidebarTitle":"Benchmarking","icon":"chart-column","href":"/products/energ/concepts/benchmarking-and-intensity"},{"title":"Baselines and weather normalization","sidebarTitle":"Baselines and weather","icon":"chart-line","href":"/products/energ/concepts/baselines-and-weather-normalization"},{"title":"Energy modeling and M\u0026V","sidebarTitle":"Energy modeling","icon":"activity","href":"/products/energ/concepts/energy-modeling"},{"title":"Budgets and capital planning","sidebarTitle":"Budgets and capital","icon":"dollar-sign","href":"/products/energ/concepts/budgets-and-capital-planning"},{"title":"Emissions accounting","sidebarTitle":"Emissions accounting","icon":"cloud","href":"/products/energ/concepts/emissions-accounting"}]},{"group":"Portfolio view","pages":[{"title":"Portfolio Home","sidebarTitle":"Home","icon":"house","href":"/products/energ/analytics/benchmarking"},{"group":"Dashboards","icon":"layout-dashboard","expanded":false,"pages":[{"title":"Portfolio Energy dashboard","sidebarTitle":"Energy","icon":"zap","href":"/products/energ/analytics/portfolio-dashboards-energy"},{"title":"Portfolio Water dashboard","sidebarTitle":"Water","icon":"droplets","href":"/products/energ/analytics/portfolio-dashboards-water"},{"title":"Portfolio Waste dashboard","sidebarTitle":"Waste","icon":"trash-2","href":"/products/energ/analytics/portfolio-dashboards-waste"}]},{"group":"Data Sources","icon":"database","expanded":false,"pages":[{"title":"Portfolio data sources","sidebarTitle":"Overview","icon":"database","href":"/products/energ/analytics/portfolio-data-sources"},{"title":"Arcadia","sidebarTitle":"Arcadia","icon":"plug","href":"/products/energ/data-sources/arcadia"},{"title":"ENERGY STAR Portfolio Manager","sidebarTitle":"ENERGY STAR","icon":"refresh-cw","href":"/products/energ/data-sources/portfolio-manager"},{"title":"CSV uploads","sidebarTitle":"CSV uploads","icon":"file-spreadsheet","href":"/products/energ/data-sources/csv-uploads"},{"title":"Manual entry","sidebarTitle":"Manual entry","description":"Create manual meters and enter utility or waste readings when automated data sources are not available in EnerG","icon":"pencil","href":"/products/energ/data-sources/manual-entry"},{"title":"KODE OS data source","sidebarTitle":"KODE OS","icon":"plug","href":"/products/energ/data-sources/kode-os-data-source"}]},{"title":"Portfolio meters","sidebarTitle":"Meters","description":"Manage and monitor utility meters across your portfolio in EnerG","icon":"gauge","href":"/products/energ/analytics/portfolio-meters"},{"group":"Baseline analysis","icon":"chart-line","expanded":false,"pages":[{"title":"Baseline analysis overview","sidebarTitle":"Overview","icon":"layout-grid","href":"/products/energ/analytics/baseline-portfolio-overview"},{"title":"Baseline analysis configurations","sidebarTitle":"Configurations","icon":"settings-2","href":"/products/energ/analytics/baseline-portfolio-configurations"}]},{"title":"Portfolio targets","sidebarTitle":"Target","icon":"target","href":"/products/energ/analytics/portfolio-targets"},{"title":"Portfolio budget and planning","sidebarTitle":"Budget","icon":"dollar-sign","href":"/products/energ/analytics/portfolio-budgets"},{"title":"Portfolio capital planning","sidebarTitle":"Capital planning","icon":"layers","href":"/products/energ/analytics/portfolio-capital-planning"},{"group":"Emissions","icon":"cloud","expanded":false,"pages":[{"title":"Portfolio emissions overview","sidebarTitle":"Overview","icon":"cloud","href":"/products/energ/analytics/portfolio-emissions-overview"},{"title":"Portfolio emissions benchmarking","sidebarTitle":"Benchmarking","icon":"chart-column","href":"/products/energ/analytics/portfolio-emissions-benchmarking"},{"title":"Emission factors library","sidebarTitle":"Emission factors","icon":"book-open","href":"/products/energ/analytics/portfolio-emissions-emission-factors"},{"title":"Volume contracts","sidebarTitle":"Contracts","icon":"file-text","href":"/products/energ/analytics/portfolio-emissions-contracts"},{"title":"Fleet emissions","sidebarTitle":"Fleet emissions","icon":"truck","href":"/products/energ/analytics/portfolio-emissions-fleet-emissions"},{"title":"Fugitive emissions","sidebarTitle":"Fugitive emissions","icon":"wind","href":"/products/energ/analytics/portfolio-emissions-fugitive-emissions"}]},{"title":"Portfolio certifications","sidebarTitle":"Certifications","icon":"award","href":"/products/energ/analytics/portfolio-certifications"},{"title":"Alert center","sidebarTitle":"Alert center","icon":"cog","href":"/products/energ/data-quality/alert-center"},{"title":"Report Builder","sidebarTitle":"Report Builder","icon":"file-spreadsheet","href":"/products/energ/finance/reporting"}]},{"group":"Building view","pages":[{"group":"Dashboards","icon":"layout-dashboard","expanded":false,"pages":[{"title":"Building dashboards overview","sidebarTitle":"Dashboards Overview","icon":"layout-dashboard","href":"/products/energ/analytics/site-dashboards"},{"title":"Building Energy dashboard","sidebarTitle":"Energy","icon":"zap","href":"/products/energ/analytics/building-dashboards-energy"},{"title":"Building Water dashboard","sidebarTitle":"Water","icon":"droplets","href":"/products/energ/analytics/building-dashboards-water"},{"title":"Building Waste dashboard","sidebarTitle":"Waste","icon":"trash-2","href":"/products/energ/analytics/building-dashboards-waste"}]},{"title":"Building information","sidebarTitle":"Building information","icon":"cog","href":"/products/energ/buildings/building-information"},{"title":"Building meters","sidebarTitle":"Meters","icon":"gauge","href":"/products/energ/buildings/meters"},{"group":"Energy Modeling","icon":"activity","expanded":false,"pages":[{"title":"Create an M\u0026V model","sidebarTitle":"M\u0026V","icon":"circle-fading-plus","href":"/products/energ/energy-modeling/mv-models"},{"title":"M\u0026V analysis","sidebarTitle":"M\u0026V analysis","icon":"cog","href":"/products/energ/energy-modeling/mv-analysis"},{"title":"Forecasting","sidebarTitle":"Forecast","icon":"chart-line","href":"/products/energ/energy-modeling/forecasting"}]},{"group":"Data Sources","icon":"database","expanded":false,"pages":[{"title":"Building data sources","sidebarTitle":"Overview","icon":"database","href":"/products/energ/buildings/data-sources"},{"title":"Arcadia","sidebarTitle":"Arcadia","icon":"plug","href":"/products/energ/data-sources/arcadia"},{"title":"CSV uploads","sidebarTitle":"CSV uploads","icon":"file-spreadsheet","href":"/products/energ/data-sources/csv-uploads"},{"title":"Manual entry","sidebarTitle":"Manual entry","description":"Create manual meters and enter utility or waste readings when automated data sources are not available in EnerG","icon":"pencil","href":"/products/energ/data-sources/manual-entry"},{"title":"KODE OS data source","sidebarTitle":"KODE OS","icon":"plug","href":"/products/energ/data-sources/kode-os-data-source"}]},{"group":"Budget","icon":"dollar-sign","expanded":false,"pages":[{"title":"Building budget overview","sidebarTitle":"Overview","description":"Track predicted, actual, and variance energy budget performance for one building in EnerG","icon":"dollar-sign","href":"/products/energ/finance/budget-overview"},{"title":"Budget model configuration","sidebarTitle":"Model configuration","icon":"settings-2","href":"/products/energ/finance/budgets"},{"title":"Budget planning","sidebarTitle":"Planning","icon":"clipboard-list","href":"/products/energ/finance/budget-planning"},{"title":"Utility cost analysis","sidebarTitle":"Cost analysis","icon":"cog","href":"/products/energ/finance/cost-analysis"}]},{"title":"Capital planning","sidebarTitle":"Capital planning","icon":"landmark","href":"/products/energ/sustainability/capital-planning"},{"title":"Building emissions overview","sidebarTitle":"Emissions","icon":"cloud","href":"/products/energ/buildings/emissions-overview"},{"title":"Building certifications","sidebarTitle":"Certifications","icon":"award","href":"/products/energ/sustainability/certifications"},{"group":"Data Quality","icon":"shield-check","expanded":false,"pages":[{"title":"Data quality","sidebarTitle":"Overview","icon":"book-open","href":"/products/energ/data-quality/data-quality-overview"},{"title":"Data completeness","sidebarTitle":"Data completeness","icon":"percent","href":"/products/energ/data-quality/data-completeness"},{"title":"Meter comparisons","sidebarTitle":"Meter comparisons","icon":"git-compare","href":"/products/energ/data-quality/meter-comparisons"}]}]},{"group":"Reference","icon":"book-a","pages":[{"title":"Data and meter fields","sidebarTitle":"Data and meter fields","icon":"table","href":"/products/energ/reference/data-and-meter-fields"},{"title":"Calculations and parameters","sidebarTitle":"Calculations","icon":"calculator","href":"/products/energ/reference/calculations-and-parameters"},{"title":"Emissions reference","sidebarTitle":"Emissions reference","icon":"table","href":"/products/energ/reference/emissions-reference"},{"title":"Interval normalization labels","sidebarTitle":"Normalization labels","icon":"table","href":"/products/energ/reference/interval-normalization-labels"},{"title":"Reporting and alerts reference","sidebarTitle":"Reporting and alerts","icon":"table","href":"/products/energ/reference/reporting-and-alerts"},{"title":"KODE glossary","sidebarTitle":"Glossary","icon":"book-a","href":"/products/energ/glossary"}]}]},{"product":"Launchpad","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/launchpad.svg","description":"Dynamic management for apps, users, and buildings","pages":[{"title":"Launchpad","href":"/products/launchpad/get-started/introduction"}]},{"product":"Mobile app","icon":"https://mintlify.s3.us-west-1.amazonaws.com/kodelabs/images/mobile-app.svg","description":"Monitor and operate buildings from iOS and Android","pages":[{"title":"Mobile app","href":"/products/mobile-app/overview"}]},{"product":"KODE API","icon":"braces","description":"Build services and integrations with KODE OS","pages":[{"title":"KODE API","href":"/products/kode-api"}]},{"product":"Integrations","icon":"cable","description":"Connect 200+ building systems to KODE OS","pages":[{"title":"Integrations","href":"/products/integrations/get-started/introduction"}]},{"product":"What's New","icon":"megaphone","description":"KODE platform release notes and updates","pages":[{"title":"What's New","href":"/whats-new/2026/v3.20-november-2026"}]}]},"basePath":"","title":"KODE OS data source - KODE Labs - Product Documentation","deploymentId":"dpl_vSEmv961Ncyvz1psVwgUnTXQMSYk","buildId":"dpl_vSEmv961Ncyvz1psVwgUnTXQMSYk","dynamics":["10e4515597","07c022d89b","a74be98ba7","a9bb46feb3"],"chunks":["BannerMarkdown-DnSAhvaM.js","dist-DIfYWxfm.js","lib-DMeTj1gb.js","lib-B8HbPgcC.js","katex-Dbtb6Wk7.js","html-void-elements-mCSPHezU.js","marked.esm-CZWythHk.js","Frame-BRsfsIIG.js","DynamicMarkdown-NFqqduU7.js","zoom-image-lightbox-BguUeq2N.js","lightbox-handle-r17bVUz3.js","Markdown-CwtoSfEf.js","AssistantPageLink-CTqa3eoi.js"]}